| Brand Name: | ToAuto |
|---|---|
| Certification: | CCC,CE |
| Type: | Hybrid |
| Model Number: | 3 Axis 86HS6640A4 |
| Phase: | 2 |
| Step Angle(degrees): | 1.8 |
| Holding Torque: | 3Nm |
| Current / Phase: | 4.0A |
| Unit Type: | piece |
| Package Size: | 10cm x 20cm x 15cm (3.94in x 7.87in x 5.91in) |
| Package Weight: | 13.0kg (28.66lb.) |
Quick Details
Specifications
3Axis Stepper Motor Kit 425oz.in Nema34 3Nm+Motor Driver+Power Supply+5Axis Breakout Board+Cable CNC Router Kit
1. Package Included :
3 x Nema34 stepper motor
3 x Stepper Driver
3 x Power Supply
1 x 5Axis Breakout Board
1 x USB Cable
1 x DB25 Parallel Cable
2. Motor Technical Parameters
| Model |
3Axis 86HS6640A4 |
| Step Angle |
1.8 Degree |
| Shaft Diameter |
14mm |
| Shaft length |
37mm |
| Rated Current |
4A |
| Phase Resistance |
0.4 ohms |
| Phase Inductance |
1.0mH |
| Holding Torque |
3NM |
| Detent Torque |
0.055NM |
| Rotor Inertia |
0.85 g.cm2 |
| Motor Length |
66mm |
| Lead wire(No.) |
4 |
| Step Angle Accuracy |
±5%(full step, no load) |
| Resistance Accuracy |
±10% |
| Inductance Accuracy |
±20% |
| Temperature Rise |
80 Degrees Celsius Max |
| Ambient Temperature |
-20°C-+50°C |
| Insulation Resistance |
100MΩ Min.500V DC |
| Dielectric Strength |
500V AC for one minute |
| Warranty |
One year |
3. Drive Technical Parameters
| Model |
MA860H |
| Type |
2Ph 256 Micro-step Driver |
|
Advantage |
|
| Item |
Min |
Typical |
Max |
Unit |
| Power supply |
24 |
- |
110 |
VDC |
| 18 |
|
80 |
VAC |
|
| Average output current |
2 |
2.5 |
7.8 |
A |
| Logic input current |
6 |
15 |
30 |
mA |
| Impulse response frequency |
- |
- |
100 |
KHZ |
| Pulse low level |
5 |
- |
1 |
μS |
4. Power supply
| Model |
S-400-60 |
| Input |
115V 6.5A 200-240VAC 4A 50/60Hz |
| Output |
60VDC 6.6A |
5. 5 axis CNC Breakout Board
| Mach3 Software |
Win XP |
|
System
|
High performance, cost-effective |
| Maximum support 5-axis stepper motor driver controllers |
|
| Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software |
|
| USB power supply and peripherals powered phase are separated to protect computer security |
|
| All the signals are opto-isolated which can protect your computer security |
|
| 5-input interface to define the Limit, Emergence-Stop, Cutter alignment etc |
|
| Wide input voltage range: 12-24V, and with anti-reverse function |
|
| One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc |
|
| Output 0-10V analog voltage for inverter to control the spindle speed |
6. System
