Leadshine 25W DC servo motor BLM57025-1000 + drive ACS606 24V 3000rpm

Introductions:

Leadshine's fully digital AC servo drive ACS306 is developed with 32-bit DSP based on advanced control algorithm. Since its input commands are PUL/DIR signals, the users can upgrade stepping drives to the ACS306 without changing control systems. The ACS306 can offer high precision, high speed and high reliability performance, and widely used in inkjet printers, engraving machines, and etc. A built-in controller can be used for testing and tuning. PC based and handheld configuration & tuning tools can meet different tuning environments or requirements. The ACS306 can drive both DC brushless and AC servo motors. But it is more suitable for the DC brushless servo motors. Compare to ACS606, the ACS306 has smaller size and additional alarm (fault) signal output to indicate error.

Features:

*Advance DSP current control technology

*Step & Dir, or CW/CCW control

*High precision; smooth & quiet motor movement

*Input voltage: 20-30 VDC

*Continuous current: 6 A

*Peak current: 15A

*Capable of driving 10 - 180 W brushless servo motors

*Electronic gear rate from 1/255 to 255

*Built-in motion profile for servo tuning and testing

*Small size, surface-mount technology

Specifications:

Parameters	Min	Typical	Max	Unit
Peak output current	0	-	15	A
Continue output current	0	-	6	A
Supply voltage	+20	-	30	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	200	kHz
Isolation resistance	500			MΩ
Current provided to encoder	-	-	100	mA

Matching motors:

Power	Models
25W	BLM57025
50W	BLM57050
90W	BLM57090
130W	BLM57130

Applications:

Suitable for large and medium automation machines and equipments, such as inkjet printers, engraving machines, electronic manufacturing equipments, special NC machines, pick and place devices, packing devices, and so on. Particularly adapt to the applications require high speed, high precision, and low motor noise.

BLM57025

 

 

Introductions:

 

Built with high quality materials, Leadshine BLM57025 is a 25W brushless DC servo motor at industrial quality.  The standard model is integrated with a 4,000 PPR (1000-line) incremental encoder. It can provide smooth movement with low noise and motor heating in your motion control system.

When driven by Leadshine ACS series servo drives, it can output the high torque you need at continuous speed from 1 rpm to 3000 rpm.  It is a flange mounted motor, and mounting is compatible with NEMA23 stepper motors. At the cost even lower than many stepper systems on the market, this solution is ideal to upgrade your system from steppers to servos, or from brushed DC servos to brushless servos. It can offer AC-servo-like performance, such as high speed, high precision, low motor noise and low heating performance, while at the cost of normal stepper systems.

Features:

*Brushless construction

*Reliable industrial quality

*NEMA23 frame size, 24 VDC rated voltage, 25W rated power

*4000 CPR (1000-line) increamental encoder with A, B signals

*0.08 N-m (11.3 oz-in) rated torque / 0.24 N-m (34 oz-in) peak

*3000 RPM rated speed / 4000 RPM peak

*Standard cabling options for direct connection to the ACS series servo drives

Specifications:

Parameters	BLM57025	BLM57050	BLM57090	BLM57130	BLM57180	57BL180
Rated Voltage (VDC)	24	24	36	36	36	36
Rated Power (W)	25	50	90	130	180	180
Rated Torque (N.M)	0.08	0.16	0.29	0.41	0.57	0.43
Peak Torque (N.M)	0.24	0.48	0.87	1.23	1.71	1.27
Rated Speed (RPM)	3000	3000	3000	3000	3000	4000
Rated Current (A)	1.6	3	3.45	5.3	6.7	7
Peak Current (A)	4.8	9	10.35	15.9	20	20.5
Torque Const. (N.M/A)	0.05	0.053	0.084	0.078	0.085	0.063
Back EMF Const. (V/RPM)	5.2	5.55	8.8	8.2	8.9	6.6
Resistance (ohm)	1.73	0.88	1.35	0.63	0.9	0.35
Inductance (mH)	3.36	2.2	4.1	2.17	2	1
Inertia (kgm2 x 10-4 )	30	75	119	173	230	230
Motor Length L (mm)	70	80	100	120	140	140
Mass (Kg)	0.25	0.5	0.75	1	1.25	1.25

Matching motors:

Models	Matching Drives
BLM57025	ACS306, ACS606
BLM57050	ACS306, ACS606
BLM57090	ACS306, ACS606
BLM57130	ACS306, ACS606
BLM57180	ACS606
57BL180	ACS606