Holding Torque: | 12NM |
---|---|
Type: | Hybrid |
Phase: | 2 |
Current / Phase: | 6A |
Certification: | CCC,CE |
Step Angle(degrees): | 1.8 |
Model Number: | 86HS15660A4G10+MA860H |
Applications: | Packaging machinery |
Unit Type: | piece |
Package Size: | 30cm x 20cm x 20cm (11.81in x 7.87in x 7.87in) |
Package Weight: | 8.0kg (17.64lb.) |
Quick Details
Specifications
Appliaction:
Inject printers, Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, engraving machine, packaging machinery, CNC numerically-controlled machine tool and transmission.
Motor Product Description:
Step Angle Accuracy: ±5%(full step, no load)
Resistance Accuracy: ±10%
Inductance Accuracy: ±20%
Temperature Rise: 80 Degrees Celsius Max.(rated current,2 phase on)
Ambient Temperature: -20°C-+50°C
Insulation Resistance: 100MΩ Min.500V DC
Dielectric Strength: 500V AC for one minute
There are multiple choice for 86BYG series geared motor. if you any other choice, please please do contact us for a better solution.
Motor Length: 66mm 80mm 98mm 114mm 126mm 156mm
Gear Ratio: 1:3 1:5 1:7.5 1:10 1:12.5 1:15 1:20 1:25 1:30 1:40 1:50 1:75 1:150 1:180
Reduction box: 90*90*45mm(Gear Ratio<20)
Reduction box: 90*90*60mm(Gear Ratio>=20)
Gear Reduction Motor Specifications
Model |
Step Angle |
Rated Current (A) |
Phase Resistance (ohm) |
Phase Inductance (mH) |
Holding Torque (N*m) |
Detent Torque (N*cm) |
Rotor Inertia (g*cm2) |
Motor Length (mm) |
86HS6640A4 |
1.8 |
4 |
0.6 |
1.6 |
3 |
5.5 |
850 |
66 |
86HS8040A4 |
1.8 |
4 |
0.75 |
5.6 |
4 |
6.5 |
1050 |
80 |
86HS9860A4 |
1.8 |
6 |
0.33 |
2.4 |
6.5 |
9.5 |
1550 |
98 |
86HS11460A4 |
1.8 |
6 |
0.5 |
2.1 |
8.2 |
12.5 |
1800 |
114 |
86HS12660A4 |
1.8 |
6 |
0.65 |
3.5 |
9.5 |
18.5 |
2200 |
126 |
Stepper Drive Specifications
Item |
Min |
Typical |
Max |
Unit |
Power supply |
24 |
- |
110 |
VDC |
18 |
|
80 |
VAC |
|
Average output current |
2 |
2.5 |
7.8 |
A |
Logic input current |
6 |
15 |
30 |
mA |
Impulse response frequency |
- |
- |
100 |
KHZ |
Pulse low level |
5 |
- |
1 |
μS |
Drive Wiring Description
Signal |
Function |
PUL |
Pulse signal: rising edge, the pulse from low to high is to go a step angle motor |
DIR |
Direction signal: TTL-level driver to change the direction |
OPTO |
Optocoupler drive power |
ENA |
Enable signal: block or allow the drive to work, low-level ban |
GND |
DC power supply ground |
+V |
DC power supply positive (typical 24VDC) |
A+ |
Motor Phase A |
A- |
Motor Phase A |
B+ |
Motor Phase B |
B- |
Motor Phase B |