| Type: | Hybrid |
|---|---|
| Phase: | 2 |
| Certification: | CCC,CE,ISO |
| Unit Type: | piece |
| Package Size: | 30cm x 20cm x 10cm (11.81in x 7.87in x 3.94in) |
| Package Weight: | 5.6kg (12.35lb.) |
Quick Details
Specifications
Description:
5 axis breakout board
1.Full support for MACH3, KCAM4, EMC2, and support parallel port to control the host computer software;
2.Leads to all the parallel port 12 data transmission output pin, which can control the five stepper motor driver;
3.With 5-way input interface, can take the limit switch and emergency stop switch, reset, and the knife;
4.5 input LED indicates the status of the input;
5.With the way 12A relay control, normally open, normally closed leads, user-friendly connection;
6.Supply 5V USB power supply or external power supply to facilitate the access of external power supply;
7.On the external drive enable signal amplification, filtering, enhancement processing;
8.Pulse, the direction of signal shaping, enhanced load capacity, data transmission speeds reach 10 MBit / S;
9.Output pins with the expansion interface can 2.54mm pin 2.54mmXH-Block;
Single Axis Stepper Motor Driver
1.the use of new imported Japanese Toshiba TB6560 chip;
2.The base used dense teeth radiator, cooling super, to ensure the stable operation of equipment;
3.the input signal using a high-speed opto-isolation to ensure not losing steps, which the pulse direction signals with the same level of 6N137, dual high-speed optocoupler;
4.a variety of semi-flow mode and the semi-flow current selection, the use of more flexible
5.Decay mode is adjustable to ensure the motor running smooth;
6.Compact Dimensions, cooling pad size: 75mm * 65mm, four mechanical installation positioning hole size is: 67mm * 58, mounting hole diameter is 4mm
7.Set method detailed table on the board, easy to use;
8.With anti-reverse circuit, even if not careful the power plug back and will not burn the chip, it's very safe to use.
Stepper Motor
| Model | 57J1876 |
| Number of phases | 2-phase |
| Number of lines | 4-wire |
| Phase voltage | 3.08V |
| Phase current | 3A |
| Resistence | 1.1Ω |
| Inductance | 3.6mH |
| Torque | 1.89N.M(270 Oz-in) |
| Shaft Diameter | 18mm |
| Axial length | 21mm |
| Side length | 57mm |
| High | 76mm |
| Weight | 1100g |
RED: A+
BLUE: A-
GREEN: B+
BLACK: B-
Switching power supply
1. the range of AC input voltage is changed by the switch
2. high-efficiency, high reliability
3.100% full load burn-in test
4. Protections: Short circuit / overload / over voltage / over temperature
5. built-in cooling DC fan control
6. Working frequency is 25 kHz
7.Input Voltage:220V
8. Output Voltage:24V
9. Output Current:10A
10.Output Power:250W
11. 1 year warranty
12.Size:215 * 115 * 50mm(L*W*H)
Package including:
1 x 24V/10A switching power supply
3 x 1 Axis TB6560 stepper motor driver
3 x 57J1876 3A 270 oz/in stepper motor
1 x 5 axis breakout board
1 x DB25 parallel cable
1 x USB cable
3 x signal cables
English user manual for 3 axis driver board will send by a CD or Email