| Type: | Hybrid |
|---|---|
| Holding Torque: | / |
| Phase: | 2 |
| Brand Name: | YunlinLi |
| Step Angle(degrees): | / |
| Current / Phase: | / |
| Model Number: | K11 |
| Certification: | / |
| Center height: | 65MM |
| Total height: | 105MM |
| Voltage: | 2.85V |
| Dimensions: | 220* 110 * 105MM(L*W*H) |
| Current: | 3.0A |
| Suction pump: piston pump noise: | < = 65dB (A) |
| Weight: | 5KG |
| Insulation resistance: | 100M0hm (500V DC) |
| Unit Type: | piece |
| Package Size: | 50cm x 26cm x 25cm (19.69in x 10.24in x 9.84in) |
| Package Weight: | 6.5kg (14.33lb.) |
Quick Details
Specifications
Engraving machine rotating head engraving machine fourth axis A axis
NC dividing head
Product Description:
Chuck Model: K11 80MM three claw center chuck
Center height: 65MM
Total height: 105MM
Angle: 0.036 degrees / step (0.018 degrees / step)
Reducer output shaft diameter: 25MM
Reduction ratio: 50: 1 (optional 100: 1 gearbox)
(Note: The gearbox is disassembled)
Stepper motor: 57MM 3A two-phase 4-wire stepper motor (domestic new)
Accessories: the total anti-claw and wrench (Figure)
Size: 220* 110 * 105MM(L*W*H)
Weight: 5KG