Step-servo driver 2HSS57:

 

·         Full closed loop control

·         Motor with standard 1000 line encoder

·         It save energy and achieve nearly 100% output torque .

·         Micro step setting range is 2-256

·         High speed response , High speed

·         Optical isolation fault  alarm output interface ALM

·         Current loop bandwidth: (-3dB) 2KHz (typical value)

·         Speed loop bandwidth: 500Hz (typical value)

·         Position loop bandwidth: 200Hz (typical value)

·         RS232 serial communication available to download or change the parameters

·         Optical isolation fault  alarm output interface ALM

·         Over current, I2T, over voltage, under voltage, temperature, speeding, over-differential protection

·         Alarm clear input ENA

 

Introduction:

2HSS57 two-phase hybrid stepper servo drive system integrated servo control technology into the digital step driver. It adopts typical tricyclic control method which includes current loop, speed loop and position loop. This product has the advantage of both step and servo system, and it’s a highly cost-effective motion control products.

 

Electrical Specifications

Parameters	Min	Typical	Max	Unit
Supply voltage	24V	36V	60V	VDC
Output Current (Peak)	-	-	6.0	Amps
Logic Input Current	-	10	-	mA
Pulse input frequency	-	-	200	KHz
Low Level Time	2.5	-	-	µsec

 

 

Environment     

Cooling	Natural Cooling or Forced Convection
Environment	Storage Space	Avoid dust, oil frost and corrosive gases
	Ambient Temperature	-20°C - +80°C
	Humidity	<80%RH
	Vibration	5.9m/s² Max
Storage Temp.	-20°C - +80°C
Weight	Approx. 300 gram

 

Size connection:

 

Motor 57J1880EC-1000:

 

Technical parameter:

2 phase hybrid step motor Electrical Specification: