(Drive+Motor)1Set 120W DC Servo Drive DCS810S + Motor DCM50207-1000 DC18-80V 30.3VDC 120W 2900RPM

Picture showing: 

DCS810S

 

Introductions: 

The DCS810S is a digital DC servo drive developed with DSP and high efficient MOSFET technologies. In position control, it's easy for the end users to change stepping drives to the DCS810S without changing control systems, because its input command is PUL/DIR signal, which is compatible with that of stepping drives. In low power motion control applications, performances of DC servo systems using the DCS810S are better than those of digital AC servo systems in velocity, precision, stability, or at least as good as those of digital AC servo systems. However, the cost of the DCS810S stays at the price line of stepping drive, namely far lower than those of AC servo drives.

The DCS810S is very easy to tune and all parameters are visible. PC based and handheld configuration & tuning tools, including ProTuner (Windows based setup software) and STU (Small servo tuning unit) can meet different tuning environments or requirements.

Features: 

*18-80VDC, 0-20A, 20-400W.

*Based on DSP control technology and high smooth servo control algorithm

*PC based and handheld configuration tools, including Pro Tuner and STU.

*Feedback resolution X4 encoder line count.

*Position Following error lock range adjustable

*Electronic gear ratio from 1/255 to 255

*Built-in motion controller for self-test with trapezoidal velocity profile

*Support PUL/DIR and CW/CCW control signals

*Opto-isolated inputs, support single-ended signals

*10 latest errors self-record function

*Over-current, over-voltage, under-voltage, phase error, encoder error, position following error protections

*Small size, surface-mount technology

Specification: 

Matching motors: 

Applications: 

Suitable for a wide range of equipments and instruments such as inkjet printers, mini type engraving machines, and etc. It performs better in applications require low noise, high velocity, high precision and high reliability.


DCM50207-1000

 

 Introductions: 

Leadshine DCM50207 is a high quality 54mm DC brush servo motors with a 1,000-line differential-ended encoder. The motors are ideal for cost sensitive applications. Built with high quality materials, it moves very quietly and smoothly with high precision and very little motor heating. It has been widely implemented in many OEM applications.

Features: 

*Reliable industrial quality

*High performance, Low cost

*Rated voltage:30.3 VDC, Rated power: 120W

*54mm frame size

*2900 RPM rated speed / 3600 RPM peak

*4000 CPR (1000-line) incremental encoder

Specification: 




Applications: 

The DCM5xxxx series brushed DC servo motors are widely used in inkjet printers, medical equipment, measuring devices, engraving machines, electronic packing equipment and so on. Particularly suited to the applications requiring minimal vibration, super-low noise, high precision and high speed.