5Sets/Lot HBS507 Professional 300W Closed

Loop 3-phase Hybrid Servo Drive Kit Drive + 573HBM20-1000 Motor

Notice :
                                                                   when the parcel arrived to your customs  ,please pay the           
                                                                     tax and pick up the parcel  ,we are not responsible for            
                                                                                    any customs duty or import tax  


                                                                       if your place is remote ,then need to pay 35usd .

Picture showing: 

Features: 
 

The HBS series offers an alternative for  applications requiring high performance and high reliability when the servo was  the only choice, while it remains cost-effective. The system includes a 3-phase  stepper motor combined with a fully digital, high performance drive and an  internal encoder which is used to close the position, velocity and current loops  in real time, just like servo systems. It combines the best of servo and stepper  motor technologies, and delivers unique capabilities and enhancements over both,  while at a fraction of the cost of a servo system.

1.Broader operating range - higher torque and  higher speed
2.Closed-loop, eliminates loss of  synchronization
3.Reduced motor heating and more efficient
4.Do not need a high torque margin
5.Fast response, no delay and almost no settle  time
6.Smooth motion and super-low motor noise
7.No Tuning and always stable
8.High torque at starting and low speed, high  stiffness at standstill

Specification: 

Model: HBS507

Phase: 3

Control Mode: Step & Direction

Max Input Frequency: 200KHz

Encoder Feedback: Yes. Fully close the loop between the drive and drive motor

Input Voltage Range: 20 - 50 VDC

Peak Current: 8.00 A

Software Cofig Resolution Range: 200 - 102,400 (increased by 200)

Default Step Resolution: 4000

Default Holding Current Percentage: 40 %

Communication Type: RS232

Pulse enabled at: Rising edge

Isolation Resistance: 500M Ohm

Environment: Avoid dust, oil fog and corrosive gases

Ambient Temporature: 0-50°C

Humidity: 40-95% RH

Operating Temporature: 0-70°C

Vibration: 5.9 m/s2 Max

Storage Temporature: -20-65°C

Specification: 4.57 X 2.72 X 1.04 Inches

Weight: 0.62 lb

Control Signal Connector - Screw Terminal