TSLEEN 4x High Bright Aluminum Shell IP65 Solar Power PIR Sensor 20 LED Light Outdoor Manor Wall Garage Lamps lamparas solares exterior

 

Features

100% Brand new!

Solar-powered products, suit for those who like to save money and use renewable energy for our better future.

Completely wireless, easy installation with prepared holes and detachable bracket, so you can mount it indoor or outdoor. When installed indoor, you can detach it in day and bask the light, then install it at dusk, you will not afraid of dark any longer.

Durable aluminum frame, waterproof/weather resistant design for outdoor use

After full-charged under the sun it can keeping working for 6-8 hours.

Using bright, stable, energy saving beads and with long life expectancy. 

Built a large PIR sensor, sensing range up to 10 feet with a 120 degree sensing angle.

The lamp can illuminate the way for you at night, also a safeguard tool to deter intruder.

When in dark night, the light will be dim without people coming near, and become bright if detect people, and the bright light will last 30 seconds until it returns to dim light again.

With smart photoconductive sensor, auto identify day or night.

A very practical tool if you like strolling at yards or feel dark after parking your car.

It is widely used for illumination in outdoor, courtyard, municipal construction, villa, balcony, wall, street, garden, plaza, entrance, garage, hallway, etc.

 

Specifications

Material: ABS + Aluminum

Shell Color: Sliver + white

Beads: 20pcs 3528 LED, 1W, 110lm

Color Temperature: Cool white

Solar panel power: 4.2V, 0.66W, 17 percent efficiency

Li-ion battery: 3.7V 1000mAh

Motion angle and distance: 120°, 3m

Delay time: 30 seconds

Night sensor: Less than 10Lux
Charging time: 5~6 hours

Working time: 6~8 hours

Waterproof: IP65

Lighting modes: Off / Dim / Bright

Size: About 13.2X9.2X5cm / 5.2x3.6x1.97"

 

How to use

1.Unlock and activate the device
The internal battery is locked for safety shipment, so users have to use the key pin to click the ON / OFF switch hole and unlock the battery and lighting system.
2.Install the device
Please use the supplied screw sleeves and screws to mount the bracket on wall or somewhere else you want for lighting.
3.Charging via solar panel
Please install the unit face south and make sure the solar panel can get the good sunlight directly without any shelter or glass. Normally it can be fully charged in one day under ideal bright sunlight.
4.Light control function
It will auto turn on PIR sensor when in darkness or at night ( less than 10Lux), turn bright when sensing, and auto turn dim when no motion, shut-off in daytime or bright area.
 

Attention

1.Keep the device away from fire. 
2.Please fully charged the device before first use, for about 5~6 hours.
3.If there is no good sunlight in 3 months, the battery may be out of power, so you have to charge it by bright sunlight.
4.If there is no good sunlight or in winter sunlight, especial in north corners, it may take longer time to fully charge the device and this is very normal for solar products.

 

Package Included

4 X Sets

1 set	1 X Solar Powered Lamp
	1 X Bracket
	2 X Expansion Pillar-hinge
	2 X Mount Screws
	1 X Switch Pin
	1 X User Manual