| Power Source: | Solar |
|---|---|
| Style: | Contemporary |
| Certification: | CE,RoHS,CCC |
| Protection Level: | IP65 |
| Body Material: | Aluminum |
| Voltage: | 6V |
| Usage: | Emergency |
| Model Number: | HBT-1608 |
| Light Source: | LED Bulbs |
| Features: | Automatically turns on and off with Microwave Radar Motion Sensor |
| Base Type: | Wedge |
| Is Bulbs Included: | Yes |
| Is Dimmable: | No |
| Warranty: | 1year |
| Solar Cell Type: | Lithium Battery |
| Brand Name: | GREENHUI |
| Unit Type: | piece |
| Package Size: | 26cm x 12cm x 5cm (10.24in x 4.72in x 1.97in) |
| Package Weight: | 0.6kg (1.32lb.) |
Quick Details
Specifications
New Arrival 4 modes 48LED Microwave Radar Motion Sensor Solar Light Waterproof Street Outdoor Wall Lamp Security Spot Lighting
Brief introduction
1. This product is an energy-saving solar product that can be installed conveniently.
2. Widely used in the courtyard, trails, gardens and some place where are inconvenient to connect electricity for illumination.
3. Easy installation: fixed installation. There is no need to install any wiring or other complicated installation procedures.
4. Using solar energy chraging system, light controller and body induction controller. Therefore, the electric circuit is off in daytime, and when people is nearby at night, it will light without any need of manual control.
5. Energy saving, if there is no one in the induction zone, the light will turn into dim.
- Item: HBT-1608
- Solar Panel Power: 3.2W 5V
- Battery: 3.7V 3000mAh Iron phosphate Lithum battery (Include)
- LED quantity: SMD2835*48PC, Luminous flux: 800lm
- Rated power: 6W
- Color Temperature: Cool white
- Working Environment Temperature: -20~60℃
- Waterproof Lever: IP65
- Case Material: Aluminum Alloy, PC, UV
- Size: 223×88×30mm
Installation Instruction:
- Put the solar light onto the wall.
- Install the product in direct sunlight, longer time the product in direct sunlight, better battery charging performance.
- Installation Height: 2.5m—3m
Operation Instruction:
1. During the daytime, the system is charging,and the light is turned off,at night,the system starts lighting automatically
2. Each press of a button will replace a light mode,switch circularly
A)power on:press and hold the button for 5 seconds to start the first mode.
B)body sensor+micro-mode:when someone comes,the light will strong,when no one comes,the light will be bright slightly.
C)human body induction mode:when someone comes,the light will strong,when no one comes, the light will turn off.
D)always light mode:it will always light at night,no induction function.
E)emergency light mode:it will be strong light for 30 minutes,and then turn off the light,the solar panel will time again after sensing the light.
F)shutdown.
3. It will work according to the installed mode every day, not need to switch again.
4. The delay time for a strong light is 15 seconds when someone is nearby,when in the induction area,the light is always bright, and when the person leaves the induction area for 15 seconds,the light enters into the power saving mode.
Additional remarks:
1. Please note that because it belongs to solar energy products, sunlight exposure time is closely related to the local weather conditions and installation location and direction, which will directly impact the charging effect.
2. The lifetime of Lithium iron phosphate battery is more than five years; it does not need to replace the battery. Because there is a battery, if the product is in the treatment, it cannot be put into the fire in case of any danger caused by an explosion.
3. This product's lampshade adopts plastic injection molding materials, which shouldn't generate lampshade rupture by littering or dropping.
1 × 48LED Solar Motion Sensor Light
2 × Screw
2 ×
Expansion pillar-hinge
1 × User Manual
How to install?
Fix the product with a right angle and make sure no shelter on the surface of solar panel.
How to use?
The product is off before delivery in order to avoid discharging during transportation. You can activate it by using the pin or related button or tearing off the film. This is depend on different item, the activate way may differ.
What to do with the rainy day or Cloudy day?
The outdoor solar light is waterproof. You don’t need to worry about it. After fully charged, the capacity of battery can keep the LED working in several rainy/ cloudy days.
If you found the light brightness is down or total off, how to handle?
It prove the power of solar light battery is not enough to support normal lighting, so you need have 2-3 goods sunlight charged, especially in Winter season, the sunlight intensity is much below the standard sunlight (1000kw/m2), it may need more longer time to charge.
Why the charging efficiency is low in winter or cloudy day?
Generally the sunlight standard is 1000kw/m2, in the winter or cloudy day, the sunlight intensity are much lower than standard so the charging efficiency is lower accordingly.