MODEL KZ-1 TOUCH SENSOR SWITCH 1. Introduction: Model KZ-1 touch sensor switch is a new technical product using body?s static electricity to control lights and automatic switch off them with a few minutes delayed-action to save energy and power. 2. Features and function: 1) It performs the control of switching on public lamps and lights below 100 watts such as ones in a corridor or passageway and washrooms and switching off with a delayed-action in one to three minutes. 2) It is designed to be an electronic switch with no-touch points. It does not make sparks, so it brings no danger to combustible and explosive materials. 3) It serves the functions of being leakage- electricity proof, electric shock proof and moisture proof. 3. Major Technical Index: 1) Operating Voltage: AC 220V ??????% ~ 50HZ 2) Load Power: ?100W 3) Static Power consumption: ?10mW 4) Environment Temperature:-20?~ +50? 5) Measurement: 86?86?23.8mm 4. Installation: 1) Two-line connecting-up is adopted for it in the same way as that for an ordinary one. 2) Do not connect to the mains until you finish the fixing. If the live-wire work is necessary, the bulb should be taken off before you do the fixing. 5. Others: 1) The light will shine one-three minutes while it is electrified after the fixing is finished and then goes out. Just softly touch the flake in a finger, it shines again one-two minutes and automatically goes out. 2) Any wrong connections and overload are not allowed. 6. Connecting the line picture: SHEN ZHEN WADEFA ELECTRONICS CO., LTD.