MODEL KZT-1 ADJUSTABLE TOUCH ELECTRON SWITCH OF LIGHT AND SPEED 1. Introduction: Model KZT-1 is a new adjustable touch electron switch of the light and speed without inner friction touch points, that makes no electric sparks and brings no danger to combustible and explosive materials. It uses body?s electron static induction to adjust the brightness of the light and speed of the fan. 2. Feature and Functions: 1) The fine and mild adjustment of the light brightness and the fan speed with no lines and cascades can be performed ranging from 10~500 watts for it, which is suitable to the speed adjustment of hall pendent fans and table fans and their switch-on-off, and to speed adjustment of hall pendent fans and table fans and their switch-on- off. It realizes the soundless and sparkles adjustment of the brightness and the speed. So it is safer, more reliable and it has a longer service-life than an ordinary one. 2) It is designed to avoid any damage to electric appliances while the switching-on generates puts voltage, and to refrain from harms to combustible and explosive places such as coal mines, oil depots and flour mill because of sparkles switching-on-off. 3) It is finely designed and made, being leakage electricity proof, moisture proof and electric shockproof. So it is called ?a safe and reliable electron-switch to save energy and power?. 3. Major Technology Index: 1) Operating Voltage: AC220V÷????%?50HZ 2) Load power: ?500W 3) Static power Consumption: ?0.01W 4) Environment Temperature:-20??50HZ 5) Measurement:86?86?23.8mm 4. Installation: 1) The adoption of two-line connecting up for MODEL KZT-1 is in the same way as that for an ordinary one and they are unchangeable (sees the connection diagram). 2) Do not connect to the mains until you finish the fixing. If the live-wire work is necessary, the bulb should be taken off before you do the fixing. 5. Others: 1) The light brightness or the fan speed changes from intentness to weakness in cycles brightness of the speed will be automatically memorized as your hand is off the flake. You just gently press the touch the flake by a finger at one touch next time if you want to switch on/off a light and a fan. 2) Any wrong connection and overload are not allowed. 5. Connecting line picture: SHEN ZHEN WADEFA ELECTRONICS CO., LTD.