PACKAGE 1: Controller only (including TTL232 communication port)

PACKAGE 2: Controller + Cable(TTL232 to USB) + Software

 

 

1. Waterproof. Waterproof, anti-corrossion, insulated protections are specially designed for circuit board. The housing is also waterproof.

2. Optional TTL232 communication. Standard TTL232 communicationmicro-port make it easy to monitor the system on a computer. (RS485, short distance wireless optional), with USB to RS232 cable, it’s very convenient to exchange data between controller and computer.

3. No damage would happen while solar power input is reverse-connected sustainedly. Controller willgo on working after correcting the reversed connection.

4. Boost MPPT input technolog.The controller provides automatic wind turbine MPPT(input maximum power tracking) mode, or 5-segment matching curve input configuration mode (RPM vs input current curve, or input voltage vs input current curve), which could maximize the power generation efficience under low wind speed.

For 12V battery, start charging voltage 6V; For 24V battery, start charging voltage 12V.

5. multiple output modes. The controller provides a variety of output modes(light control, time control, morning light) feasible for various applications.

6. The controller could calculate cumulative power generated, remaining power, RPM, current, temperature and other data.

The controller displays not only conventional data such as output current/voltage/power of wind turbine/solar panel/battery, but also the cumulative power generated by wind/solar, remained battery power and RPM.

Wind: input voltage/current/power/cumulative power/RPM/unloading current

Solar: input voltage/current/power/cumulative power

Battery:Voltage/charging curent/power/cumulative power

7. Protections:

Wind: Over speed protection,over current protection, induced lightning strike protection

Solar: Reverse connection protection

Battery: Reverse polarity protection(fuse burn-out), over voltage protection, low voltage protection(for street lights)

Insulation Grade: IP41

 

Battery Parameters
Rated Voltage	12V/24V Auto Recognition
Protection	reverse polarity protection(fuse burn-out), over voltage protection, low voltage protection(for street lights)
Over voltage protection point	29.0V±0.2V(14.5V±0.2V)
Over voltage protection recover point	27.5V±0.2V(13.7V±0.2V)
Low voltage protection point	21.0V±0.2V(10.5V±0.2V)
Low voltage protection recover point	23.0V±0.2V(11.5V±0.2V)
Wind input parameters
Rated wind power	300W/12V,600W/24V
Start charging voltage	6V(12V system) /12V(24V system)
Rated input current	20A DC(after rectification)
Maximum input current	25A DC(after rectification)
Default rotation speed limit	500 Rpm (adjustable)
Default input current limit	20A (adjustable)
Protection	Over speed protection,over current protection,induced lightning strike protection
Unloading method	PWM highfriquency smooth unloading (build-in) & Manual brake
MPPT mode	Boost MPPT(MPPT or 5-segment curve input tracking)
MPPT channal input current	5A default
PV input parameters
Rated Power	Standard 300W/12V, 600W/24V
	(Optional 500W/12V, 1000W/24V)
Rated input current	Standard 15A, (Optional 30A)
Voltage drop when charging	<0.2V
PV protection	Reverse connection protection
Unloading method	Open circuit
Load output parameters
Output way	2 ways
Output current/way	12A
Output mode	Light control, time control, morning light, permanent output.
Other parameters
Display	three-digit numeric LEDdisplay
Communication	Standard TTL232(5V voltage level)
	(Optional RS485/short distance wireless RF)
Contents	Wind: input voltage/current/power/cumulative power/RPM/unloading current
	Solar: input voltage/current/power/cumulative power
	Battery:Voltage/charging curent/power/cumulative power charge/battery status info
standby power consumption(screen backlight off)	About 17ma /24V
Operation	2 buttons
Working temperature & humidity	-40~+80℃/20~85%RH (no condensation )
Protection grade	IP41
Dimension	158mm*113mm *60mm
Net weight	0.8KG

 

 

Please kindly be noted that the degital cable and USB extension cord is only included in package 2.