MPPT 30A 12V 24V Solar Charge Controller LCD Display with Real-time Energy Statistics Function for Liquid and GEL Battery NEW

 

1) Heat Sink

        --dissipate controller heat

2) Plastic Case

        --Internal protection

3) LCD

        --Display settings and operating status,system parameters

4) Key:MENU,OK

        --Set and view the operating parameters

5) Two USB interfaces

        --Output 5V,2A

6) Temperature Sensor Port

        --Collect temperature information,Temperature compensation.

7) Load Terminals

        --Connected load.

8) Battery Terminals

        --Connect the battery

9) Solar module terminals

        --Connected solar modules.

 

Magic series solar controller on based on an advanced maximum power point tracking(MPPT) technology developed,dedicated to the solar system,the controller conversion efficiency up to 97%.

 

Features:

1) Innovative Max Power Point Tracking(MPPT) technology,tracking efficiency >99%.

2) Full digital technology,high charge conversion efficiency up to 97%.

3) LCD display design,read operating data and working condition easily.

4) Real-time energy statistics function.

5) 12V/24V automatic recognition.

6) Liquid and GEL battery for selection

7) External temperature sensor, automatic temperature compensation.

8) Built-in temperature sensor,when the temperature exceeds the set value ,the charging current will lower down followed by the decrease of temperature,so as to control the controller’s temperature rise.

9) Four stages charge way:MPPT,boost,equalization,float.

10) With current-limiting charging mode,when the power the charging power,which enables the system to work under the rated charging current.

11)  Multiple load control modes:Standard,Dusk to Dawn,Timer and test mode.

12) Two USB interfaces(EU Series).

13) Based RS-485 standard Modbus protocol,to maximize their communication need of different occasions.

14) Perfect EMC & thermal design.

15) Full automatic electronic protect function.

 

LCD:

 Status Description:

 

Data:

?

	Item	MT1050 EU	MT2075	MT2010	M 3075	MT3010
Battery Parameters	System Voltage	12 V/24 V automatical  recognization
	Max Charging Voltage	10A	20A		30A
	MPPT Charging Voltage	< 14.5 / 29.0V @25°C
	Boost Voltage	14.5 / 29.0 V @25°C
	Equalization Voltage	14.8/29.6 V @25°C (Liquid)
	Float Voltage	13.7 / 27.45 V @ 25℃
	Low Volt.Disconnect	10.8~11.8 V/ 21.6~23.6 V,SOC 1~5
	Reconnect Voltage	11.6~12.8 V/23.2~25.6 V
	Overcharge Protect	15.5/31.0V
	Max voltage on Batterminal	35V
	Temp.Compensation	-4.17 mV / K per cell ( Boost,Equalization) -3.33mV / K per cell (Float)
	Battery Type	Liquid,Gel
Panel Parameters	Max volt on PV terminal	45 V	55 V	90 V	55 V	90 V
	Max input power	130 W	260/520 W		390/780 W
	Dusk / Dawn detect volt.	8.0 / 16.0 V
	MPPT tracking range	(Battery Voltage + 1.0)~ Voc *0.9
Load	Output Current	10 A	20 A		30 A
	USB interface	5 V,2 A	------------
	Work mode	Standard, D2D ,Street lamp mode(2~9 hours)
System Parameters	Max tracking efficiency	>99.9%
	Max charge conversion	96.5%	97.0%
	Dimensions(mm)	189*96*53	189 x 182 x 58
	Weight	480 g	1000g
	Self consumption	7mA
	Ambient temperature	-20 ~ + 50°C
	Storage temperature	-25 ~ + 80°C
	Ambient humidity	0 ~ 100% RH
	Protection degree	IP 32
	Max Altitude	4000 m

Pictures: