| Application: | Solar System Controller |
|---|---|
| Maximum Current: | 10A |
| is_customized: | Yes |
| Model Number: | HSSC02 |
| Rated Voltage: | 12V/24V |
| Unit Type: | piece |
| Package Size: | 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) |
| Package Weight: | 0.3kg (0.66lb.) |
Quick Details
Specifications
Solar Charge Controller HSSC02 12V / 24V 10A power intelligent controller 133*70*31 mm solar panel controller
Features:
Functions:
1. Overload
2. Short-circuit protection
3. Lightning protection
4 undervoltage protection
5. overcharge protection
Connection:
1. The solar panels on the "+" and "-" correctly and securely connected to the (1) (left 1, 2) protection corresponding terminals;
2. The battery "+" and "-" correctly and securely connected to the appropriate terminal protector (left 3, 4);
3. Load the "+" and "-" correctly and securely connected to the appropriate terminal protection (from the left 5, 6).
Indicator:
1. Voltage LED 3, indicating the battery voltage level. 3 full light indicates when sufficient voltage. When only one or two lights, indicating that the battery voltage is low, it may not work load is normal. To be charged when the battery voltage is 12.6V reach more loading will be allowed to work.
2. A charge indicator, light indicates charging is strong, flashing that is a floating charge, no light means charge has been stopped.
3. A load indicator, light indicates there is output and load can work; no light means no output, the load can not work. (See above)
Precautions:
1. Please check and confirm before wiring the solar panels, batteries, rated voltage of the load, the rated voltage of the three should be the same, and are 12V.
2. Special attention when connecting solar panels, batteries, load the "+" and "-" can not be wrong.
3. Solar panels, shall not exceed the rated load current protection device rated current.
Parameter Description:
| Type | HSSC02-5A | HSSC02-10A | HSSC02-20A | HSSC02-30A |
| Rated charge current | 5A | 10A | 20A | 30A |
| Rated load current | 5A | 10A | 20A | 30A |
| Work voltage | 12V/24V Auto sensoring/auto switch | |||
| Over-load and short circuit protection | Over-load protection: when the current of controller is 1.25 times of the rated current, the controller works for 30 seconds; 1.5times of the rated current, works for 5 seconds. Short circuit protection: when the current of controller is more than or equal to 3 timess or rated current, the protection starts. | |||
| No load losses current | 5mA-20mA (only when digital LEDs be lighted) | |||
| Charging circuit voltage drop | <= 0.26V | |||
| Load circuit voltage drop | <= 0.15V | |||
| Over volltage protection | 14.8V; *2.24V | |||
| Boost charge voltage | 14.6V; *2/24V (times of duration: 10minutes) | |||
| Direct charge voltage | 14.4V; *2/24V (times of duration: 10minutes) | |||
| Float charge voltage | 13.6V; *2/24V | |||
| Charge recover voltage | 13.2V; *2/24V | |||
| Over discharge recover voltage | 12.6V; *2/24V | |||
| Lower voltage indication | 12.0V; *2/24V | |||
| Over discharge voltage | 11.1V; *2/24V(no load) real-time modified voltage by the discharge rate | |||
| Temperature compensation | - 4.0Mv /C / 2V(boost voltage, direct charge, float charge and charge return voltage compensation) | |||
| Control method | PWM Pulse-duration modulation charge mode | |||
| Working temperature | Industry stage: - 35C to +55C | |||
| Circuit protection | Over-charge, over-discharge, short circuit andd over-load protection | All the protections are harmless to any parts and fuse of controller | ||
| Anti-connection-reverse protection for solar battery and storage battery. | ||||
Instruction Manual:
