Tracer 1215BN 10A MPPT Solar Panel Battery Charge Controller 12V 24V Auto Solar Controller PV Regulator with RS485 USB Cable

>>Overview                                                                                  

 

Thank you for selecting the Tracer-BN series controller which represents advanced technology of our company.The Tracer-BN series controller is for off-grid solar system and control the charging and discharging of the battery. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging.

The battery charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults. In addition, the Tracer-BN series controller has a RJ45 interface to allow communication with other accessory.

 

>>Features                                                                                  

 

• 12V/24V automatic identify or user-defined working voltage.

• Excellent heat dissipation. Using the integration of cast aluminum radiator shell, the controller can be natural cooling.

• Advanced maximum power point tracking technology to optimize using the solar system. Peak conversion efficiency is as high as 98%.

• Lock the MP point fast and the controller provides the industry’s highest tracking efficiency of 99%.

• Widely used, automatic recognize day or night.

• Several load methods are supported to convenient for different demand.

• Support 4 charging options: Sealed, Gel, Flooded and User-defined.

• Adopting temperature compensation and correcting the charging and discharging parameters automatically, improving the battery lifetime.

• Protection: over temperature, over charging, PV and load short, PV (battery) revered, over current protection.

• Actual power convenient and record function makes convenience to check the datum every day, every month and every year.

• RS-485 ports via the open standard Modbus protocol are supported to meet different occasion of demand.

• With supporting PC monitoring software and remote meter MT50, it is convenient to check the real-time data of controllers and set the parameters.

• Support firmware update.

• CC-USB-RS485-150U,communication cable of EP solar controller , EPEVER controller connected to PC.

 

>>Characteristics                                                                        

 

Figure  Tracer-BN Series Characteristics

1. – Heat Sink

Cast aluminum heat sink to dissipate controller heat.

2. – Charging LED Indicator

Indicate that the battery is charging or not.

3. – Battery LED Indicator

Show charging status.

4. – Key

Switch the load on/off in the manual mode and clear the part of faults.

5. –Temperature Sensor Port

Connect remote temperature sensor to measure ambient temperature and make temperature compensation for charging and discharging.

6. – Solar Module Terminals

Connect solar modules.

7. – Battery Terminals

Connect batteries.

8. – Load Terminals

Connect loads.

9. – RS-485 Port (RJ45 interface)

Connect with PC or MT50 to monitor or update firmware.

 

>>Specification                                                                           

 

Model	Tracer 1215BN
Nominal system voltage	12/24V auto work
Rated  battery current	10A
Rated  load current	10A
Max. PV open circuit voltage	150V at minimum operating environment temperature 138V at 25℃ environment temperature
MPP Voltage range	Battery voltage+2V～108V
Max. PV input power	130W/12V      360W/24V
Equalize charging voltage	Sealed: 14.6V,  Flooded: 14.8V, USER: 9~17V
Boost charging voltage	Gel: 14.2V,  Sealed: 14.4V,  Flooded: 14.6V, USER: 9~17V
Float charging voltage	Gel /Sealed /Flooded: 13.8V,   USER: 9~17V
Low voltage reconnect voltage	Gel /Sealed /Flooded: 12.6V,   USER: 9~17V
Low voltage disconnect voltage	Gel /Sealed /Flooded: 11.1V,   USER: 9~17V
Self-consumption	≤60mA(12V)  ≤30mA(24V)
Grounding	Common negative
Temp. compensation	-3mV/℃/2V
Communication Port	RS485 / RJ45 interface
Working temperature	-35℃～+55℃
Storage temperature	-35℃～+80℃
Humidity	≤95% N.C.
Enclosure	IP30
Overall dimension	196x118x36mm
Terminal	4mm2
Net weight	0.9kg

?

>>Product Show