Tracer 3215BN 30A MPPT Solar Panel Battery Charge Regulater 12V 24V Auto Solar Charge Controller with MT50 Meter and USB Cable

>>Overview                                                                                

 

Thank you for selecting the Tracer-BN series controller which represents advanced technology of our company.The Tracer-BN series controller is for off-grid solar system and control the charging and discharging of the battery. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging.

The battery charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults. In addition, the Tracer-BN series controller has a RJ45 interface to allow communication with other accessory.

 

MT50 is an optional remote meter to monitor and program EPsolar controller, compatible with:LS-B, LS-BP,VS-BN, Tracer-BN,Tracer-A, eTracer, iTracer.

 

 

>>Features                                                                                  

 

Tracer 3215BN

• 12V/24V automatic identify or user-defined working voltage.

• Excellent heat dissipation. Using the integration of cast aluminum radiator shell, the controller can be natural cooling.

• Advanced maximum power point tracking technology to optimize using the solar system. Peak conversion efficiency is as high as 98%.

• Lock the MP point fast and the controller provides the industry’s highest tracking efficiency of 99%.

• Widely used, automatic recognize day or night.

• Several load methods are supported to convenient for different demand.

• Support 4 charging options: Sealed, Gel, Flooded and User-defined.

• Adopting temperature compensation and correcting the charging and discharging parameters automatically, improving the battery lifetime.

• Protection: over temperature, over charging, PV and load short, PV (battery) revered, over current protection.

• Actual power convenient and record function makes convenience to check the datum every day, every month and every year.

• RS-485 ports via the open standard Modbus protocol are supported to meet different occasion of demand.

• With supporting PC monitoring software and remote meter MT50, it is convenient to check the real-time data of controllers and set the parameters.

• Support firmware update.

?MT50

• Automatic identify  the controller, and display relevant parameter data

• Large-screen informative LCD displays all the operating data and system working status

• Simple and convenient operation

• Real-time alarm of failure information

• Longer communication distance based on RS485

• Diversified load control modes : Manual Control, Light ON/OFF, Light ON+ Timer, Time Control

• Battery type selection: Gel, sealed, flooded and User(programable)

• Programmable parameters

• Energy  statistics display function

 

>>Characteristics:                                                                      

Figure  Tracer-BN Series Characteristics

1. – Heat Sink

Cast aluminum heat sink to dissipate controller heat.

2. – Charging LED Indicator

Indicate that the battery is charging or not.

3. – Battery LED Indicator

Show charging status.

4. – Key

Switch the load on/off in the manual mode and clear the part of faults.

5. –Temperature Sensor Port

Connect remote temperature sensor to measure ambient temperature and make temperature compensation for charging and discharging.

6. – Solar Module Terminals

Connect solar modules.

7. – Battery Terminals

Connect batteries.

8. – Load Terminals

Connect loads.

9. – RS-485 Port (RJ45 interface)

Connect with PC or MT50 to monitor or update firmware.

 

>>Specifications:                                                                         

 

? Model	Tracer 1215BN	Tracer 2215BN	Tracer 3215BN	Tracer 4215BN
Nominal system voltage	12/24V auto work
Rated charge current	10A	20A	30A	40A
Rated discharge current	10A	20A	20A	20A
Communication Port	RS485 / RJ45 interface
Max. PV open circuit voltage	50V at minimum operating environment temperature   138V at 25℃ environment temperature
MPP voltage range	Battery voltage+2V～108V
Max. PV input power	130W(12V) 260W(24V)	260W(12V) 520W(24V)	390W(12V) 780W(24V)	520W(12V) 1040W(24V)
Equalize charging voltage	Sealed: 14.6V, Flooded: 14.8V;USER:9~17V
Boost charging voltage	Gel: 14.2V, Sealed: 14.6V, Flooded: 14.8V;USER:9~17V
Float charging voltage	Gel /Sealed /Flooded: 13.8V,   USER: 9~17V
Low voltage reconnect voltage	Gel /Sealed /Flooded: 12.6V,   USER: 9~17V
Low voltage disconnect voltage	Gel /Sealed /Flooded: 11.1V,   USER: 9~17V
Self-consumption	≤60mA/12V; ≤30mA/24V
Temperature compensation coefficien	-3mV/ ºC/2V
Working temperature	-35 ºC ～+55 ºC
Enclosure	IP30
Overall dimension	196x118x36mm	217x143x56mm	281x160x60mm	303x183x64mm
Power terminals	4mm2	10mm	16mm	25mm
Net weight	0.9kg	1.5kg	2.3kg	2.9kg
Model	MT50
Self-consumption	Backlight and acoustic alarm on<65mA Backlight on<23mA Backlight off <15mA
Faceplate dimensions	98×98 mm / 3.86×3.86 in
Frame dimensions	114×114 mm / 4.49×4.49 in
Connector type	RJ45
Meter cable	Standard 2m, max .50m
Meter weight	0.190 Kg
Ambient Temperature	-20℃~+70℃/-4℉~158℉

 

>>Product Show