EPSOLAR ET6415BND 60A MPPT Solar Charge Controller RS232 RS485 with Modbus protocol CAN Bus 12V 24V 36V 48V auto work

 

 

 

 

This Series MPPT solar controller is a high-end industrial class product based on multiphase synchronous

 rectification technology and has the features of high efficiency and reliability. The features are listed  below:

- 12/24/36/48VDC system voltage automatic recognition or user-defined working voltage

- Smart tracking algorithm that finds and maintains operation at the solar array peak power point with the tracking  efficiency as high as 99.7%

- Multiphase synchronous rectification technology ensures peak conversion efficiency is up to 98.7%

- High effective conversion efficiency at small power charging with multiphase power decentralized control and  improves the generated energy

- Double processors architecture with high speed and performance improves the response speed and optimizes the  performance of the system

- Multiphase control technology, optimizes charging current smoothness, reduces ripple and improves the system   generating efficiency

- Excellent EMC design

- Excellent heat dissipation. Using the integration of cast aluminum radiator shell, the controller can be natural cooling

- 128*64 dot-matrix LCD intuitively displays data and state, 6 buttons combinations for easy operation

- RS-232, CAN, RS-485 ports via the open standard Modbus protocol are supported to meet different occasion of demand

- Support 4 charging preprogram options: Sealed, Gel, Flooded and User-defined

- Protection: Over temperature, over charging, PV (battery) revered, PV reverse current protect at night, over current protection

- Actual Power Display and record function make convenience to check the datum every day, every month and every year

- Log function: work logs and alarm logs are all recorded

- Firmware update: convenience to after-service and maintenance service

The controller features a built-in fuzzy control algorithm that maximizes the energy from the solar module(s) and charge the battery.

The battery charging process has been optimized for long battery life and improved system performance. The  comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults.

Please take the time to read this operation's manual and become familiar with the controller. This will help you make   full use of all the functions and improve your PV system.

 

Maximum 150 Volt dc systems**

RS-232, RS-485 and CAN port

 

 

1 – Heat Sink: Aluminum heat sink to dissipate controller heat.

2 – LCD: Display the status and data.

3 – Battery LED indicator: Three states of battery LED indicator show charging status.

4 – Charging LED indicator: Indicate that the battery is charging or not.

5 – Fault LED indicator: Indicate that controller faults.

6 – Buttons: Browse or modify all parameters.

7 – RS-232 port: Monitor controller by PC and update controller software.

8 – RS-485 port: Monitor controller by PC and update controller software.

9 –RTC battery: Power to RTC, battery model is CR2032.

10 – Remote Temperature Sensor port(MC1.5-5.08-2L)

Connection for a RTS (Remote Temperature Sensor, optional) to remotely monitor battery temperature.

11 – Remote Battery Voltage Sensor port(MC1.5-5.08-2L)

Connection for RBVS (Remote Battery Voltage Sensor) to provide accurate battery voltage measurement.

12 – CAN bus Port (MC1.5-3.81-4L)

Communicate with other CAN bus devices via our company custom protocol.

13 – Solar Positive Terminal  +  : Power connection for Solar Positive Terminal. 

14 –Solar Negative Terminal  - : Power connection for Solar Negative Terminal.

15 –Battery Negative Terminal: Power connection for Battery Negative Terminal.

16 –Battery Positive Terminal: Power connection for Battery Positive Terminal.

 

Specifications

 

Electrical Parameters:
	ET6415BND
Nominal System Voltage	12/24/36/48VDC Auto
Nominal Battery Current	60A
Maximum Solar Input Voltage	150V
Battery Voltage Range	8-72V
Maximum Input Power:
12V:	800W
24V:	1600W
36V:	2400W
48V:	3200W
Self Consumption	1.4-2.2W
Grounding	Common Negative Grounding

  Mechanical Parameters:

	ET6415BND
L:	449.1(17.1)mm(inch)
W:	208(8.2)mm(inch)
H:	107(4.2)mm(inch)
Net Weight:	5.5kg
Terminal:	35mm2
Mounting Hole:	Φ10

 

Attention:

1. If your address is remote area by DHL or FedEx or TNT,then we will send by other express.

2. We can low down some price for less customs duty when shipping, please leave the value of product you want us to declare, otherwise,we will declare by our experience; and we will not bear the high tariff cost,buyer must bear the reponsibility by themselves.

3. The Customers from Brazil please must leave CPF number or CNPJ number, otherwise, the shipping company will refuse the transport;

Environmental Parameters:

LCD Temp-20C - +70C

Ambient Temp-25C - +55C

Storage Temp-30C - +85C

Humidity≤95%, N.C.

EnclosureIP20

 Protection:

Solar input short protection

Solar input reversed polarity protection

Solar input reverse current protect at night

Battery reversed polarity protection

Battery over voltage disconnect protection

Battery over voltage reconnect protection

Battery over temperature disconnect protection

Controller over temperature disconnect protection

 

Conversion Efficiency Curves:

 

 

Payment:

2. Payment must be made within 3 days of order.

3. If you can't check out immediately after auction close, please wait for a few minutes and retry.

 

Shipment:

1. We guarantee to ship out within 48 hours after payment confirmation (except Holiday).

2. Delivery time is approx. 7 to 15 business days (excluded Saturday & Sunday, Public Holiday) to most US/UK/AU destinations .

3. EMS express shipping usually takes 3-7 working days dependent on the country delivered to. We are not responsible for any accidents, delays or other issue that are the responsibility of the shipping service.

4. In order to ensure you receive you order tax free upon import, we will declare it as a 'GIFT' with a lower value. This lower price does not reflect the total price you paid or the market value of the product and may not apply to countries with different tariff rules. Any import charges or fees are the buyer's responsibility.

5. Please contact us if you don't receive it over above 4 weeks, we will solve this problem in a very short time.

6. All our items will be shipped to buyer's Wholesales Alibaba address please confirms your address on Alibaba before you bid. Please make sure the shipping address is correct. We are not responsible for any wrong or undeliverable addresses.

 

Feedback:

1. We depend on our Alibaba reputation and customer satisfaction to succeed. Therefore, your

2. feedback is extremely important to us.

3. If you love my items please leave me good feedback. Your action will help us offer our milk and bread. I will do the same for you.

4. Please contact us before leaving any negative of neutral feedback. We will work with you to solve any problems.

 

Return:

1. We provide 2 years warranty. If the item is defective, please notify us within 3 days of delivery.

2. All items must be returned in their original condition, in order to qualify for a refund or exchange of goods.

3. But shipping fee and insurance is not refundable.

4. Items returned after 7 days of delivery are only eligible for repair.

5. The buyer is responsible for all shipping costs incurred.

 

Contact:

1. All emails will be answered within 24 hours.

2. Please leave a message in the Trade Manager

3. If you do not receive our reply, please kindly re-sent your email and we will reply you as soon as possible . If you email us and don’t hear a reply, please email again through the Alibaba system as sometimes our mail servers have errors.

 

 

Welcome your visit to our store, please contact us anytime if you have any question!!!