10PCS Solar Charge Controller 60A LCD Display PWM Charging Model 12V24V Auto Work Voltage Settable for Lead-acid GEL Flooded Batteries

60A LCD

High Effective PWM 

1. 10cs cm6024 solar controllers
2. 10cs temp sensors
3. 10cs user manuals(English)

  
CM series controller is a kind of intelligent, multi-purpose solar charge and discharge controller. The family use the fixed LCD display, with a very friendly interface; various control parameters can be flexibly set, fully meet your various application requirements. CM series controller has following features:

>>Accumulated function of charge and discharge Ampere hours

1. Ready tools and cables. Encourage you to matching the right cables. Ensure that the current density<4mm2 that is conductive to reducing the line voltage drop. Recommended: 60A with 20mm2 cable. Check weather the installation sitescompliance with the relevant safety requirements. Please avoid the damp, dusty, there is a place flammable, explosive and corrosive gases use the controller to install.

2. Install the controller into a fixed vertical plane. See section 5 of the pore size and pore spacing. In order to ensure a good thermal control conditions, please set aside each 10cm below the controller space.

3. As shown on the right, connect the (1) Load, (2) Battery and (3) Solar Panel to the controller according to the order of (1) (2) (3). Pay attention to the load, battery, solar panel and controller of same polarity.

4. Put into the external temperature sensor on the left of the controller (probe port). The temperature sensor should be similar space with battery. (Otherwise, the controller will control the parameters of all wrong temperature compensation.)

5.If you have remote monitoring and control function, please insert one end of the included communication wire on the right of the controller (communication port), the other end to connect to The host computer.

Demolition: To prevent accidents, please order the demolition of solar panels, battery and load disconnect with controller.

Note:Battery polarity will not damage the controller, but you will have a load equipment security risks.

 

Model	CM6024Z	CM6048
Rated Current	60A
Rated Voltage	12V/24V	48V
Maximum Voltage of solar panel	50V	100V
Float Voltage	13.7V/27.4V	54.8V
Low Voltage Disconnection	10.7V/21.4V	42.8V
Low Voltage Reconnection	12.6V/25.2V	50.4V
No load loss	<30mA
loop voltage drop	<200mV
Charging Mode	PMW Mode
Temperature Compensation	-4mV/Cell/Degree
Notes	Model suffix ?Z? represent automatic identify system voltage level,?T? represent controller with remote monitoring

"     Quality first, customer orientation     " is our purpose. YSmart Technology will be committed to provide the best service to you!

1. WORLDWIDE SHIPPING.

2. Orders processed timely after the payment verification.

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.

4. The images shown are not the actual item and are for your reference only.

5.Ordes processed within 24-48 hours of payment verification.

6. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.

7. If you have not received your shipment within 40 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

8. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po #.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the product (s) is (are) not as advertised.

1. 12 months Manufacturer `s limited Warranty for defective items (excluding items damaged and / or misused after receipt). MPPT solar controllers come with 24 months warranty.

2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY .

You agree to all of the above-listed policies upon ordering on aliexpress!

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

It is impossible to address issues if we do not know about them!