24VDC input 600w hybrid Solar Wind Charge Controller wind regulator, new

 

 

This listing includes 1 pcs of Hybrid Wind Solar Charge Controller 600W Regulator, 24VDC

(Remark: default input voltage of wind turbine is: 24VDC, if you need 24VAC, please let me know)

INTRODUCTION: 

The advanced wind/solar hybrid controller is specially designed for high-end small-scale wind solar hybrid system, and especially suitable for wind/solar hybrid street light system& wind/solar hybrid monitoring system. The controller can control wind turbine and solar panel at the same time and transform the wind&solar energy into electricity for the DC load use, with excess energy stored into batteries. Varieties of appearance and function design, which is flexible to meet the requirements of different customers.

PERFORMANCE FEATURES:

- Superior military-grade components to ensure the product stability.
- Perfect protection function, thus the system has higher reliability.
- Check and set all operation parameters as requirement from LCD display.
- Voltage limiting and current-limiting charge mode, ensures battery in the best charging status.
- Two DC Load output, light-control, time-control, constant output, and multiple output control mode selection.
- PWM stepless unload mode, which burn the excess power into dump load, making the battery charging in best status.
- Design of high quality aluminum alloy appearance, with small size and good cooling effect.
- European CE certification.

- Manual in English

TECHNICAL PARAMETERS:

Rated Battery Voltage	24V
Rated Wind Turbine Power	600W
Wind Turbine Maximum Input Current	40A
Wind Turbine Maximum Input Power	1000W
Unload Voltage(factory default)	28V
Unload Current(factory default)	25A
Rated Solar Power	300W
Battery Over Discharge Voltage Shut off	22V
Battery Over Discharge Recovery	24V
Output Protection Voltage	32V
PV Voltage Of Light-Control On	Adjustable(2V)
PV Voltage Of Light-Control Off	Adjustable(3V)
Load 1 Rated Output Current	10A
Load 2 Rated Output Current	10A
Load 1 Output Mode(Factory Default)	3 Modes Selection(Light-Control On and Light-Control Off)
Load 2 Output Mode(Factory Default)	3 Modes Selection(Light-Control On and Time-Control 5 hours)
Control Mode	PWM
Display Mode	LCD
Display Parameters	Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current, PV Voltage, PV Charge Current, PV Power, Battery Voltage, Over Voltage, Under Voltage, Over Load, Short Circuit, Night. etc
Working Temperature &Humidity	-20~+55 Cel. Degrees/35~85%RH(Without Condensation)
Temperature Compensation(optional)	4mV/Cel. Degrees/2V ,–35 Cel. Degrees--+80 Cel. Degrees, Precision:±1 Cel. Degrees
Communication Mode(optional)	RS232
Quiescent Current	≤20mA
Protection Function	Solar reverse charge protection , Solar reverse connection protection, Battery overcharge protection, Battery over discharge protection, Battery reverse connection protection, Lightning protection, Wind turbine current limiting, Wind turbine automatic brake
Optional Function	Optional Function 1:RS Communication and Matched Software . Install the matched software to computer and connect controller with Computer Via software. User can adjust parameters from software by themselves. User can know the state of whole system Via software. All data will be stocked into excel files from software.
	Optional Function 2:Low Voltage Charge Function. with this function. Controller can start charging battery when wind turbine voltage is lower than battery bank voltage ,For example ,Controller can start charging battery from 4V if runs in 24V battery bank