| is_customized: | Yes |
|---|---|
| Application: | Charger Controller |
| Maximum Current: | 20Amps |
| Model Number: | CM20D |
| Rated Voltage: | 12v 24v auto |
| Unit Type: | lot (10 pieces/lot) |
| Package Size: | 20cm x 12cm x 12cm (7.87in x 4.72in x 4.72in) |
| Package Weight: | 3.0kg (6.61lb.) |
Quick Details
Specifications
Package including:
1.10PCS 20A Solar Contorller CM20D 20A
2.10PCS User Manual
CM20D 20A Solar Charge Controller ,BATTERY OPTION,VOLTAGE SETTABLE
CM20D controller is a kind of intelligent, multi-purpose solar charge and discharge controller. Fixed LCD display with a very friendly interface is used in this product; various control parameters can be flexibly set, fully meet your various application requirements.
This is a settable charge controllers:
1. Floating charge Voltage(HVD 13.3V-15V)
2. Recovery after under Voltage(LVD 11V-13.5V)
3.Under Voltage protection (RVD 9V-12.3V)
4.Load Mode(24hours,1-23hours,0hour)
5.Battery Option (GEL,LEAD-ACID,FLOODED)
Features:
| Visual LCD graphic symbols |
Simple button operation |
| Automatic Identification of System Voltage level |
Intelligent PWM charging mode |
| Automatic Temperature Compensation (custom) |
Adjustable charge-discharge control parameters |
| Settable Operating mode of Load |
Battery reverse-discharge protection |
| Battery Low Voltage Disconnection (LVD) |
Battery reverse connection protection |
| Over current protection. |
|
P1: Digital parameters.
P2:Charging indication. This symbol indicates that the solar panel is charging the battery; without this symbol means solar panel can not charge the battery because of low voltage. If the symbol is flickering, means the battery is fully
charged and has entered float charging state.
P3:Indication for solar panel. This symbol indicates that the connection of solar panel is detected by controller; without this symbol means the connection of solar panel can not be detected, or there is no sunshine on the solar panel.
P4:5 bars battery power indication.
P5: Discharging indication. This symbol indicates that controller is in output state, otherwise not in the output state. The flickering of this symbol indicates the damages of internal control devices.
P6:load indication. This symbol indicates that controller is in output state, otherwise not in the output state. The flickering of this symbol indicates overload or the damage of the load.
P7:A stands for the unit of current; H stands for hour.
P8:V stands for the unit of voltage.
Data Sheet
| Type Parameters |
CM20D |
Type Parameters |
CM20D |
|||
| Rated current |
10A24V |
20A24V |
30A24V |
Charge and discharge voltage drop |
<0.2V|<0.1V |
|
| Rated voltage |
12V/24V Automatic Identification |
Charging mode |
PWM mode |
|||
| Voltage of solar panel |
≤50V |
Temperature compensation |
-4mV/Cell/°C(to be customized) |
|||
| Floating charge |
13.8V/27.6V |
Specification of the cables |
≤5# AWG (6mm2) |
|||
| Under-voltage protection |
10.7V/21.4V |
Working temperature |
-20°C~60°C |
|||
| Under-voltage recovery |
12.6V/25.2V |
Storage temperature |
-30°C~70°C |
|||
| Boost voltage |
b01 sealed 14.4V/28.8V |
(Duration:2hours) |
Temperature requested |
≤90%,No condensation |
||
| b02 Gel14.2V/28.4V |
Dimension |
88 mm×160 mm×37 mm |
||||
| b03Flooded 14.6V/29.2V |
diameter of mounting hole |
64 mm×150 mm --Φ5 |
||||
| Open circuit losses |
≤13mA |
Weight |
230g |
|||
| Remark |
|
|||||