| Application: | Lighting Controller,Solar System Controller,Charger Controller,Solar Working Station,Voltage Controller |
|---|---|
| Maximum Current: | 10A |
| is_customized: | Yes |
| Brand Name: | Y-SOLAR |
| Model Number: | SM1010 |
| Max volt on Bat.terminal: | 40V |
| Battery type: | Liquid,Gel |
| Over Charge Protect: | 15.5/31.0v |
| Max volt on PV terminal: | 90V |
| Max input power: | 130W/260W |
| Protection degree: | IP67 |
| Load: | 10A |
| Max tracking efficiency: | >99.9% |
| Self consumption: | 6 mA |
| Ambient temperature: | -30 ~ 60 C |
| Unit Type: | piece |
| Package Size: | 10cm x 8cm x 5cm (3.94in x 3.15in x 1.97in) |
| Package Weight: | 0.7kg (1.54lb.) |
Quick Details
Specifications
10A MPPT Solar Controller with 5 Stages Time Adjustment Function 12V 24V IP67 Solar Charge Controller with Optional LCD Remote
Smart-MPPT series intelligent MPPT solar controller is programmable and especially for solar light system. The charging efficiency is about 20% higher than the traditional PWM controller, which can make the cost of the whole system much lower.
Self Test
As soon as the controller is supplied with battery, it starts a self test routine. Then the display changes to normal operation.
System Voltage
The solar controller adjust itself automatically to 12V or 24V system voltage .As soon as the battery voltage at the time of start-up is within 10V to 15V ,the controller implies a 12V system ,else if the battery voltage is within 20V ~30V ,The controller impliers a 24V system ?If the battery voltage is not within the normal operating rang
BatteryType
The solar controller applies to Liquid and Gel Battery ,the facotry default setting is suitable for Gel Battery
Features:
-
Innovative Max Power Point Tracking(MPPT) technology, tracking efficiency >99%
-
Full digital technology, high charge conversion efficiency up to 96%
-
5 stages time can be adjusted
-
Can read parameters and running status
-
When BMS power off because of LVD, it can activate the system automatically
-
Charging target voltage and charging recovery voltage can be set
-
Day/Night threshold can adjust automatically
-
Remote Unit to configure, with LCD display IP67, Strong and durable aluminum case
-
Full automatic electronic protect function
Parameter:
| Item | SM0875 | SM1010 | SM1075 | SM1575 | |
|---|---|---|---|---|---|
| Battery Parameters | System Voltage | 12V | 12V/24V automatical recognization | ||
| Max Charging Current | 8A | 10A | 15A | ||
| MPPT Charging Voltage | <14.5°C | <14.5/29V | |||
| Boost Voltage | 14.5 | 14.5/29V | |||
| Equalization Voltage | 14.8(Liquid) | 14.8/29.6V(Liquid) | |||
| Float Voltage | 13.7 | 13.7/27.4 | |||
| Low Volt. Disconnect | 10.8~11.8V SCO 1~5 | 10.8~11.8V/21.6~23.6V;SOC 1~5(Programmable) | |||
| Reconnect Voltage | 11.4V~12.8V | 11.4~12.8V/22.8~25.6V(Programmable) | |||
| Overcharge Protect | 15.5V | 15.5/31.0V | |||
| Max volt on Bat. terminal | 25V | 40V | 35V | ||
| Temp. Compensation | -4.17mV/K per cell (Boost ,Equalization),-3.33mV/K per cell (Float) | ||||
| Battery Type | Liquid, Gel | ||||
| Max volt on PV terminal | 60V | 90V | 60V | ||
| Panel Parameters | Max input power | 100W | 130W/260W | 220W/400W | |
| Dusk/Dawn detect volt. | 3.0~20.0(Programmable) | ||||
| Day/Night delay time | 0~30 Min(Programmable) | ||||
| MPPT tracking range | (Battery Voltage +1.0V)~Voc*0.9 | ||||
| Load | Output Current | 8A | 10A | 15A | |
| System Parameters | Max tracking efficiency | >99.9% | |||
| Max charge conversion | 96.0% | 97.0% | |||
| Self consumption | 6mA | ||||
| Dimensions | 85.8x 81 x 23.1mm | 85.8 x 145 x30 mm | |||
| Weight | 260g | 600g | |||
| Ambient temperature | -35~ +60°C | ||||
| Ambient humidity | 0~100% RH | ||||
| Protection degree | IP67 | ||||
| Max Altitude | 4000m | ||||
Pictures:
