LS1024B,LS2024B,LS3024B 10A-30A Solar Controllers

All the models adopt aluminum heat sink which enables the reliability in high temperature enviroments.RS-485 connects to a remote meter or PC for real-time monitoring, custom setting and control etc.

Package including:

·Three system voltage configuration : 12V, 24V or 12V/24V auto work
·High efficiency PWM charging with temperature compensation
·3 LEDs shows PV charging, battery and load status
·External temperature sensor interface
·RS-485 bus communication
·Open standard Modbus communication protocol
·Software update function
More powerful function via MT50 or PC
·Diversified load control modes : Manual, Light ON/OFF, Light ON+ Timer, Time Control
·Battery type selection: Gel, sealed, flooded and User type
·Real-time monitor
·Programmable parameters
·LVD? or SOC load disconnect function
·Energy statistics function

Electronic Protections:
·PV short circuit
·PV reverse polarity
·Battery overcharge
·Battery over discharge
·Battery reverse polarity
·Load short circuit
·Load overload
·Overheating

Electrical parameters	LS1024B	LS2024B	LS3024B
Nominal System Voltage	12 / 24V auto work
Rated Battery Current	10A	20A	30A
Maximum?battery?voltage	50V
Grounding	Common positive
Self-consumption	8.4mA(12V),7.8mA(24V)
Temp. compensation	-3mV/°C/2V(25°C)
Equalize charging voltage	Sealed: 14.6V, Flooded: 14.8V, User-defined: 9~17V
Boost charging voltage	Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, User-defined: 9~17V
Float charging voltage	Gel /Sealed /Flooded: 13.8V, User-defined: 9~17V
Low voltage reconnect voltage	Gel /Sealed /Flooded: 12.6V, User-defined: 9~17V
Low voltage disconnect voltage	Gel /Sealed /Flooded: 11.1V, User-defined: 9~17V
Working temp.	-35°C~+55°C
Humidity	≤95% (NC)
Enclosure	IP30
Dimension	138.6x69.3x37mm	159.6x81.4x47.8mm	200.6x101.3x57mm
Terminal	4mm2	10mm2	10mm2
Net weight	0.13kg	0.3kg	0.5kg