Description:

This auction includes: 1 pcs of solar charge controller for DUO BATTERY CHARGING, 12/24 voltage, 10A, (without remote meter).Ideal for off-grid solar system up to 120W, 12V or 270W,24V.This controller is compatible with MT-1 Remote Meter.

 

Features:

Two battery charging eliminates the extra cost of two separate solar charging system 
Intelligent System Optimum Control 
12/24V auto work 
Battery type selection 
Charging frequency optional 
High efficient Series PWM charging 
Local external temperature compensation 
Remote temperature sensor optional 
Use MOSFET as electronic switch, without any mechanical switch 
Remote meter MT-1 optional 
Electronic protection: over charging, short circuit, battery reverse polarity protection 
Microcontroller digital accuracy
PWM Charge mode
State of charge (SOC)
Temperature compensation
Automatic detection of the voltage
External temperature sensor
Remote meter MT-1 shows the working data and condition
Battery type option 
Battery AH setting
Charging priority setting
Modify parameters through four keys

 

Technical Specification:

System voltage	12 / 24VDC Auto work
Nominal battery current	20A
Charge circuit voltage drop	≤0.26V
Discharge circuit voltage drop	≤0.15V
Self consumption	≤6mA
Humidity	10%-90% NC
Enclosure	IP30
Net weight	0.15KG
Dimension	LWH 153*76*37mm
Battery voltage range	8-15V(12V system),8-30V(24V system)
Setpoint	Sealed battery   Flooded battery    Gel battery
Boost voltage	14.2V                  14.4V                14.6V
Equalization voltage	14.4V                 14.6V                14.8V
Float voltage	13.7V                  13.7V                13.7V
Maximum solar voltage	30V/12V system(or 55V/24Vsystem)
Battery voltage range	1-15V
Boost time	30 minutes
Self-consumption	4mA at night, 10mA at charging
Meter bus connection	8-pin RJ-45
Temp. compensation: -30mV/12V	-30mV/12V
Terminals	4mm2
Temperature: -35 to +55	-35 to +55
Note	All data for 12V, for 24V, please use 2x

 

 Remote meterFeatures MT1:

MT-1 is an optional accessory for EPIPDB-COM series solar charge controller. The LCD displays the system status and parameters clearly.Remote digital display for the 10Amp/20Amp Duo- Battery Solar Charge Controller. Ideal for monitoring and display current solar system status. Displays both solar voltage and battery voltage as well as charging current and load current. Shows Amp-Hour and Watt-Hour charge accumulation as well as percentage the batteries are charged. Easy to use and program and is ideal for a quick system check.

 

Full Digital Display:

1. Displays Voltage, Current, Amp-Hours, Watt-Hours and Percentage Charge

2. Suitable for both 12V and 24V Systems

3. Temperature Display

4. Easy to Use and Set-Up

5. Full Installation Instructions Included

6. Dimension : 95*95*24mm

7. ll mounting board, can be mounted in or on the wall. With 2  meter cable

This solar controller can charge two battery banks. No load terminals