Unit Type: | piece |
---|---|
Package Size: | 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in) |
Package Weight: | 0.054kg (0.12lb.) |
Quick Details
Specifications
Just working for lead-acid battery's charging control
Equipped with device to avoid the overcharge, over release, electronic short circuit, over loading, battery inversely connecting, solar battery inversely connecting.
The series connection PWM circuit is implemented to form the major charging circuit, make the voltage loss 50% lower than the diode charging circuit, and the charging efficiency 3%-6% higher than the non-PWM.
The LED displayer shows the batteries current situation to make the customer get the information of the batteries.
The controller can automatically identify the voltage of 12V. Just working for lead-acid battery's charging control
Equipped with device to avoid the overcharge, over release, electronic short circuit, over loading, battery inversely connecting, solar battery inversely connecting.
The series connection PWM circuit is implemented to form the major charging circuit, make the voltage loss 50% lower than the diode charging circuit, and the charging efficiency 3%-6% higher than the non-PWM.
The LED displayer shows the batteries current situation to make the customer get the information of the batteries.
The controller can automatically identify the voltage of 12V.
Install and use:
The preparation of the conducting wire:calculate the length of the wire ,and then figure out the installation place,make sure the length of the wire is reasonable to decrease the loss of the electricity.
Connect the battery first,pay attention to the anode and the cathode to avoid the inverse connection.the indicator light of the battery willwork if the connection is correct,otherwise,it will not ,but the component of the controller will not be damaged.
Connect the wire of the solar panel, pay attention to the anode and the cathode to avoid the inverse connection.if the connection is correct,the indicator light of "CHARGE"will be on or flash 10 seconds later after laying outside under the sun,otherwise,please check the connection.make sure the solar energy panel is laid outdoors under the sunshine.
Connect the load at the end,pay attention to the anode and the cathode to avoid the inverse connection .if inverse connection ,the led lamp may be damaged.
Warnings for usage:
The batteries has stored much energy,please keep the batteries from the short circuit under any circumstances,we strongly recommend connecting the batteries with the fuse.
Please avoid the short circuit wire and the terminal,for the wire and the terminal may generate voltage two times higher than the rated voltage of the controller.Please use the insulated tools while operating the controller.
Ensure the children keep away from the battery and the controller.
Please comply with the manufacturer`s safety advice.
Package Includes:
1 x solar charger controller
Warm Notice
1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as the shown in the pictures, but not the same performance on different bodies as on the model. Thank you!
2. Please allow 1-2 cm differs due to manual measurement, thanks!
Payment
1. The best way is direct online payment.
2. Full payment must be make within 7 days after placing your order, or the order will be invalid or canceled by the system.
3. Make sure that you have completed all the detailed information like contact person, address, post code and telephone number when filling in your buyer's information.
Return and warranty
1. All the goods are inspected before shipment, so if you are not satisfied with the purchase, you can exchange the items in one week and you must contact us within 24 hours of the receipt of your purchase.
2. The shipping and handling charge is not refundable and customer should be responsible for all the charges of returning and reshipping.
3. All return items must be in its original conditions, including box and accessories. Men and defects are not guaranteed, such as broken, scratched and so on.
4. For any items, please send by EMS or your local post when send back.
Feedback
1. Buyer's early confirmation will be highly appreciated after receiving the items.
2. Since your feedback is very important to our business's development, we sincerely invite you to leave positive feedback for us if you are satisfied with our products and service. It'll just take you 1 minute, but this 1 minute has the extremely vital significance to us.
3. Please contact us before disputes or leaving any negative or neutral feedback we will work with you to solve any problems.. thanks for your understanding.