Rated Voltage: | 24V |
---|---|
is_customized: | Yes |
Maximum Current: | 4AMPS |
Application: | Solar System Controller |
Model Number: | SST-001-24V |
Unit Type: | piece |
Package Size: | 12cm x 12cm x 12cm (4.72in x 4.72in x 4.72in) |
Package Weight: | 0.5kg (1.10lb.) |
Quick Details
Specifications
New Version ( one battery need only , the old version is 2 battery need to drive the system )
so it can help to save more .
Important note:Tracking number 100% available for any countries ship order to .
Never Cheating .
Solar tracker with LED sensor
1 set
Input power : Battery 24 DCV ,
This circuit is 1 battery need ( exclude in this item ), it is for motor turn to right and turn to left ( details can be check from the attached instruction in package )
Item is cable exclude .
This solar tracking controller will drive a motor to position anything you want to follow the sun on a single axis. It can be used to position solar cells, a reflector to heat water, or anything else. The controller is mounted on the object to be steered with the sensors positioned along the rotational axis. Using most any D.C. motor up to a maximum of 24 DCV @ 10 amps, it can easily cause a solar collector, reflector or array to follow the sun through a single axis. Motors suitable for this system can move quite large loads as long as proper gearing or lead screws are used. The controller uses a differential sensing approach and can drive the motor in either direction. PRODUCTS INTRODUCTION
Product Classification:
1. Single-Axis Type (Model No. SST-001-24V )
Our single axis solar tracker has the function of tracking the movement of the sun during the time of sunrise to sunset. It can assist your solar collector to absorb more 35%-45% of solar energy in comparison with the collector which has not installed solar tracker.
Note : the shape of heatsink is little bit different with the photo
2. Two-Axis Type (Model No. SST-002 )
Our two axis solar tracker also has the function of tracking the movement of the sun during the time of sunrise to sunset. In addition, it can detect the deviation of sunrise angle in different seasons and automatically adjust the angle of the tracker to chase the sunshine, and so that it can absorb more 55%-75% of solar energy in comparison with the collector which has not installed solar tracker.
Note : we promise 100% test and 100% work .
This item suit for any one who would like to build the solar tracker system by them self .
Please contact us by e-mail
Caution :
Please do not attempt to change the use of this product,
or change the input voltage and circuit.
This may lead to damage to the product or burned,
Please follow the instructions need to connect all the cables,
otherwise the product can not work properly or damaged and the
Company does not make any compensation to any improper use .