| is_customized: | Yes |
|---|---|
| Application: | Solar System Controller |
| Maximum Current: | 8A |
| Rated Voltage: | 12V |
| Model Number: | YS1208 |
| Max Input : | 44V 100W |
| Battery Voltage : | 12V |
| Charge and Discharge Current: | 8A |
| Equalization: | 14.6V |
| Bulk: | 14.4V |
| Float: | 13.8V |
| Charge reconnect: | 13.0V |
| Discharge reconnect: | 12.6V |
| USB output: | 5V 3A |
| Unit Type: | piece |
| Package Size: | 20cm x 10cm x 5cm (7.87in x 3.94in x 1.97in) |
| Package Weight: | 0.2kg (0.44lb.) |
Quick Details
Specifications
12V Solar Charger Controller 8A 4-Stage PWM LED Solar Regulator for Max 42V 100W Solar Panel Input Triple 12V DC Dual USB Output
Product Fearures:
1.Build-in industrial micro controller.
2. Input and output LED display,a simple 4-stage battery capacity indicator.
3.Fully 4-stage PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production.
6.Model is equipped with USB cell phone charger and Triple DC output.
7.Solar panel and battery input are tree-free design.
Note:The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL it is not suited for nickel metal hydride, lithium ions or other batteries.
Connection:
Press the ON/OFF button each time to disconnect or re-connect the load output.
ATTN 1.connector the solar panel by the "solar input" port if the solar panel is already with a 5.5-2.1mm DC connector.do not connect another solar panel to the tool free connector at the same time.
ATTN 2.DC output can support any 12V DC load,such as LED lamp or fan.
Technical Parameter:
| Model |
YS-08 |
|---|---|
| Batt voltage |
12V |
| Charge current |
8A |
| Discharge current |
8A |
| Max Solar input |
42V |
| Charge drop |
<0.2V |
| Discharge drop |
<0.25V |
| Equalization |
14.6V |
| Bulk |
14.4V |
| Acceptance |
14.2V PWM |
| Float |
13.8V |
| Charge reconnect |
13.0V |
| Discharge stop |
11.2V |
| Discharge reconnect |
12.6V |
| Self-consume |
<10mA |
| Temperature compensation |
N/C |
| USB output |
5V 3A |
| Operating temperature |
-35~+60°C |
| Size/Weight |
115*72*40mm /150g |
Trouble Shooting :
| Situation |
Probable cause |
Solution |
| Charge LED not on when sunny |
Solar panel opened or reversed |
Reconnect |
| Load LED off |
Battery low |
recharge |
| Load LED slow flashing |
Over load |
Reduce load watt |
| Load LED slow flashing |
Short circuit protection |
Auto reconnect |
| Power off |
Battery too low/reverse |
Check battery/connection |
Pictures:
