10A Solar Charge Controller Regulator LED indicator Voltage Settable  for solar lighting and solar home use PWM Mode 10I ST

The controller is for off-grid solar system,especially in solar lighting system and protects the battery from being over charged by the solar module and over dischargerged by the loads.The charging process has been optimized for long battery life and improved system performance.The comrehensive self-diagnostics and electronic protection functions can prevent damaged from installation mistakes or system faults.

Three battery type option:

Gel,Sealed,Flooded 

Settable:

Float charging voltage;

Low voltage reconnect voltage;

Low voltage discounnect voltage;

Load start-up delay;

Optical sensitivity.

Four load working modes:

Pure lighting control

lighting control &timing control,

hand operation 

debug mode.

 

Features:

12/24V automatic recognition 

·High efficient Series PWM charging, increase the battery lifetime and improve the solar system performance. 

·Use MOSFET as electronic switch, without any mechanical switch 

·Widely used, automatically recognize day/night. 

·Digital LED menu, only one key solve all setting simply 

·Intelligent timer function with 1-15 hours option 

·Unique dual timer function, enhance the flexibility of street light system. 

·Gel, Sealed and Flooded battery type option. 

·Adopt temperature compensation, correct the charging and discharging parameters automatically 
and improve the battery lifetime. 

·Electronic protection: Overheating, over charging, over discharging, 

overload, and short circuit. 

·Reverse protection: any combination of solar module and battery. 

Settings

. Load Control Settings 

1. Dusk to Dawn 

When solar module voltage goes below the point of NTTV (Night Time Threshold Voltage) at sunset, 
the controller will recognize the starting voltage and turn on the load after 10 minutes delay. When 
solar module voltage goes above point of DTTV (Day Time Threshold Voltage), the solar controller 
will recognize the starting voltage and turn off the load after 10 minutes delay. 

2. Light ON + Timer 

When solar module voltage goes below the point of NTTV (Night Time Threshold Voltage) at sunset; 
the solar controller will recognize the starting voltage and turn on the load after 10 minutes delay. The 
load will be on for several hours which users set through LED digital tube. The controller has dual timer
 function. Please refer to table 4-5-Load Work Mode Setting II. 

3. Test mode 

This mode is the same as Dusk to Dawn. But there is no 10 minutes delay when controller recognizes 
the starting voltage. When below the starting voltage, the controller will turn on the load, if higher, it will
 turn off load. 

The test mode makes it easy to check the system installation. 

4. ON/OFF mode 

This mode is to turn ON and OFF the load by manual. 

A.Load Work Mode Setting 

When the led digital tube is not display, Press the setting button "Key" more than 5 seconds , 
and keep on press it once more,led digital tube will  be changed once among

 

0	Load work mode
b1	Battery type
J0	Load start-up delay
S5	Optical sensitivity
F0	Float charging voltage
H0	Low voltage reconnect voltage
q0	Low voltage disconnect voltage
8.8.	Restore factory Settings.

 

Describe	LED digital No.
Dusk to Dawn, Load will be on all night	0
Load will be on for 1 hour after ten minutes delay since sunset	1
Load will be on for 2 hour after ten minutes delay since sunset	2
Load will be on for 3 hour after ten minutes delay since sunset	3
Load will be on for 4 hour after ten minutes delay since sunset	4
Load will be on for 5 hour after ten minutes delay since sunset	5
Load will be on for 6 hour after ten minutes delay since sunset	6
Load will be on for 7 hour after ten minutes delay since sunset	7
Load will be on for 8 hour after ten minutes delay since sunset	8
Load will be on for 9 hour after ten minutes delay since sunset	9
Load will be on for 10 hour after ten minutes delay since sunset	10
Load will be on for 11 hour after ten minutes delay since sunset	11
Load will be on for 12 hour after ten minutes delay since sunset	12
Load will be on for 13 hour after ten minutes delay since sunset	13
Load will be on for 14 hour after ten minutes delay since sunset	14
Load will be on for 15 hour after ten minutes delay since sunset	15
ON/OFF mode	16
TEXT mode	17

Data Sheet:

 

Description	Parameter
Nominal System Voltage	12 / 24VDC Auto work
Battery Voltage Range	6-36V
Rated Battery Current	10A,20A,30A
Charge Circuit Voltage Drop	≤0.26V
Discharge Circuit Voltage Drop	≤0.15V
Self-consumption	≤6mA

 

Threshold Voltage Parameters

Description	Parameter
NTTV (Night Time Threshold Voltage)	5V; x2/24V
DTTV (Day Time Threshold Voltage)	6V; x2/24V

 

Temperature Compensation Coefficient

 

Description	Parameter
Temperature Compensation (TEMPCO)*	-25mV/°C/12V[25°C ref]

start22363605393943end22363605393943