| Rated Voltage: | 24V |
|---|---|
| Maximum Current: | 30A |
| Model Number: | ww06-24-B00 |
| is_customized: | Yes |
| Application: | Charger Controller |
| Unit Type: | piece |
| Package Size: | 15cm x 12cm x 5cm (5.91in x 4.72in x 1.97in) |
| Package Weight: | 1.0kg (2.20lb.) |
Quick Details
Specifications
1. Safety Instructions
PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION OR OPERATION OF THIS PRODUCT.
1.1 Please make sure the output voltage of wind generator is consistent with rated battery voltage.
1.2 Please connect the cables of plus-n-minus of battery firstly and then connect the three cables of wind generator.
1.3 Please make sure you connect battery and wind generator with controller according to this instruction, opposite polarity or wrong position connection will result in abnormal operation of system or damage of system components.
1.4 When operating hand braking, please make the smaller red cable and battery anode in short circuit, then controller will brake. Disconnect the smaller red cable, hand braking function will be cancel.
2. Wiring
2.1 Connect the “+” and “-“of battery with battery plus-n-minus input terminals of controller.
2.2 Connect the three cables of wind generator with three voltage input terminals of wind generator of controller.
3. Lights
3.1 When battery light (green) is on, it indicates battery connection is normal.
3.2 When wind generator light (green) is on, it indicates wind generator connection is normal and it shows the rotation speed of wind generator by twinkle speed.
3.3 When brake light (red) is on, it indicates controller is braking automatically due to battery full charged or over-current protection function operation of controller.
Features:
Rate Battery voltage: 24V
Brake voltage: 30V
Recovery charging voltage: 27V
Be able to 100w to 600w wind-turbine, 24V
Mini size, be easy to be install
Specification:
| Items | WW06-24-B00 | |
| Rated Battery Voltage | 24V | |
| Rated Wind Generator Capacity:(Min) | 600W | |
| Rated Wind Generator Capacity:(Max) | 600W | |
| Wind Generator Braking Voltage | 29V | |
| Wind Generator Recover Voltage | 26.4V | |
| Wind Generator Braking Current | 30A | |
| Display Mode | LED | |
| Ambient Temperature | -35~+75℃ | |
| Dimensions(L x W x H) | 100mm×105mm×49mm | |
| Quiescent Current | ≤20 mA | |
| IP Protection Level | IP67 |
Installation:
AC in: connect the wind turbine to three RED cables
DC out: connect the black cable to the negative pole of battery; connect
the red cable to the positive pole of battery.
Package:
