| Model Number: | 10S11.1 |
|---|---|
| Maximum Current: | 10A |
| is_customized: | Yes |
| Application: | Charger Controller |
| Rated Voltage: | 11.1V |
| Rate charge current: | 10A |
| Rate discharge current: | 10A |
| Charge loop drop voltage: | less than 0.7V |
| Discharge loop drop voltage: | less than 0.1V |
| Protection Degree: | IP30 |
| Working temprature: | -20 deg to 50 deg |
| Outlet diameter size: | 53.4mm*68.6mm*22mm |
| Net weight: | 0.03kg |
| Unit Type: | piece |
| Package Size: | 10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in) |
| Package Weight: | 0.2kg (0.44lb.) |
Quick Details
Specifications
CE Approved Solar Charge Controller for Lithium Battery/11.1V 10A Solar PV Panel Controller for Lamp Charging/Soalr Regulator
Characteritics
1. Equipped with the MCU,
2. Equipped with device to avoid the overcharge, over release, electronic short circuit, over loading, battery inversely connecting, solar battery inversely connecting.
3. Use the battery discharge rate characteristics to correct discharge control.
4.The series connection PWM circuit is implemented to form the major charging circuit,make the voltage loss half of or lower than the diode charging circuit,and the charging efficiency 3%-6% higher than the non-PWM.
5. The LED shows the batteries current situation to make the customer get the information of the batteries.
6. Three operating modes can be selected: normally open mode, the pure light control mode and light control plus timing mode.
Warning for Usage
1:The batteries has stored much energy,please keep the batteries from the
short circuit under any circumstances,we strongly recommend connecting the batteries with the fuse.
2:Please avoid the short circuit wire and the terminal,for the wire and theterminal may generate voltage two times higher than the rated voltage of the controller.Please use the insulated tools while operating the controller.
3:Ensure the children keep away from the battery and the controller.
4:Please comply with the manufacturer`s safety advice.
5:Because of the equipment work may have a fever, please keep ventilation.
6:The device pay attention to water,moisture,in order to avoid damage to the equipment.
Suitable range
The controller is only applicable to solar power, rated voltage of 6V or 12V systems,Lithium batteries.
Note: specifically how much battery charge, see the product model, product can not be adapted to the various systems.
Picture Show
