Features:
1, Simple and practical battery discharge protection board.
2, Using variable resistor
3, Green LED lights on when working, lights off when disconnected.
4, Discharging protection for a variety of 12V accumulato
5, Disconnected automatically, re-connect manually

Used for: Discharging protection for a variety of 12 V accumulator. Designed for 12 accumulator, but it will auto cut output load when the voltage of accumulator is lower than 10V. (It self will consume about 80 mA)

Specifications:
Protection Voltage:
Adjustable, potentiometer counterclockwise is low, clockwise is high.
Factory Value: 12 V
System: 10 V

PCB Size: 5x3.5cm/1.97x1.38inch

Note:
1, Inductive load(e.g. motors) can not be used. 30 A is the load current that relay contact allow, it is not current of accumulator.
2, After load is disconnected automatically, when the battery voltage is back to setting value, it cannot re-connect automatically but manually.
3, Please allow 1-3 mm error due to manual measurement. Thanks for your understanding.
4, Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard

Package includes:
1 Pc x Protection Module