4 inch a red common anode digital tube

 4-inch digital / Dimensions 122.00x90.00x15.00mm / Public pin 1-8 feet / number of chips : 58 chips, two parallel four series .

LED digital tube profile ?

1 , Product Name: 4 -inch red common anode digital tube

2 , the word digits: 1
3, the screen size: 4 inches
4 , Color: red ; ( other colors can be customized )

5,8 word Height: 4 inches (101.60mm)

6 , Dimensions :122x90x15mm

7 , public foot: 1-8

8 , the total PIN number : 10 pins

9 , Polarity: Common Anode
10 , the surface color : black panel
11 , Font color: red / green / blue / white / orange

12 , colloidal color : white

LED digital tube characterization

 can drive the LED at low voltage , low current conditions

 luminous very short response time (\u003c0.1μs), good high-frequency characteristics , good color , high brightness

 small size, light weight, impact resistance. Solid package, the package of plastic irrigation , high stability

 long life, life at 50,000 hours or more

 continuously scan drive each byte

 good display , wide viewing angle

 recommend constant use , constant brightness will appear uneven

 surface protective film products, you can tear off before use

 soldering temperature : 260 ° longest stay 5 seconds

 When the working temperature is higher than 25 °, Ifm, ifp and Id must be reduced ; current reduction rate is -036mA / ° ( DC drive ) , or -0.86mA / ° ( pulse drive ) power

Rate is -0.75mW / °. Current product can not be greater than 60% corresponds to the operating temperature conditions Ifm or Ifp 's .

 Blue ,Emerald green ,White Please take anti -static measures

 

 

LED digital tube kind shooting Figure( Since the camera pixels and light reasons, may in actual luminous colors have a slight deviation )