| Item Type: | LED Modules |
|---|---|
| Certification: | CE,FCC,CCC,RoHS |
| Brand Name: | SAGE LU MEI |
| Features: | E20C-3535-5V-UCS1903 |
| Height: | 3535RGB*1 |
| Width: | 3535RGB*1 |
| Length: | 3535RGB*1 |
| Model Number: | E20C-3535-5V-UCS1903 |
| Voltage: | 5V |
| Unit Type: | lot (100 pieces/lot) |
| Package Size: | 21cm x 21cm x 5cm (8.27in x 8.27in x 1.97in) |
| Package Weight: | 7.0kg (15.43lb.) |
Quick Details
Specifications
100PCS E20C 20mm Diameter LED 3535 RGB Full Color Grid Screen 5V UCS1903 IC Module Lights
1. Product Features:
beautiful, high-end, generous, elegant;
Products using 3535RGB full color lamp beads;
Wire and shell selection of cold, anti-UV, flame retardant materials, suitable for long-term outdoor use, protection class IP65;
Taiwan wafer LED chip, with high brightness, light color consistency, color saturation, good stability and so on
Special bayonet design, directly attached to the buckle above, wire directly installed, easy to install quickly and easily
PU plastic potting, mechanical strength, product protection level is high
2. Application:
Floor contours, floor lighting, large shopping malls facade, KTV entertainment and the hotel's bright screen, and so on.
3. Product Size:
4. Product parameters and the use of the environment
Serial number item parameter
1 drive mode constant current drive
2 input voltage DC5V
3 power 0.3W
4 LED lights number 3535RGB * 1
5 chip brand Taiwan wafer
5 shell material PC
6 Dimensions 20MM * 10MM
7 hole size
8 Degree of protection IP65
9 working environment temperature -20 ~ +60 ℃
10 single lamp distance
11 control mode external control
12 life ≥ 50000H
13 weight / string
14 product shelf life of 2 years
15 Storage temperature -30 ~ + 80 ℃
6. Installation instructions:
The rated voltage of a single string is between 5 ± 0.5 V, rated current 20mA, rated power 0.3W;
Constant voltage power supply output voltage can not be higher than the rated voltage, otherwise it will cause damage to the lamp;
Must use the product supporting the LED drive power, not supporting the drive power may cause damage to the lamp;
Connect the red line to the positive side of the power supply, connect the blue wire to the negative terminal of the power supply, connect the power cord to the main line every twenty modules;
All connections at the installation of waterproof, insulation treatment, check the correct before power;
The center of the distance 5cm-10cm is appropriate, according to the area, the installation height to determine,
7. Common troubleshooting:
(A), the phenomenon: all the LED flashing
Question: a, bad contact.
B, some LED switching power supply overload protection function, when the LED exceeds its power will be strobe warning.
Solution: a, find loose place to re-fixed or plug.
B, replace the power of the larger LED switching power supply.
(B), the phenomenon: LED dim
Problem: a, LED polarity reversed.
B, LED series too long.
C, switching power supply and LED voltage label is inconsistent.
D, LED light-emitting chip light failure.
Solution: a, to ensure that the positive and negative wiring is correct.
B, to reduce the LED connection.
C, to ensure that the switching power supply and LED voltage label consistency.
D, replace the LED chip or module.
(C), the phenomenon: part of the line of LED lights do not shine
Question: a, the direction of the patch is correct.
B, the power output wiring is correct.
C, the power cord is reversed, reverse.
Solution: a, remove, re-correct the direction of plug.
B, to ensure that the red line connected to the cathode, black line then negative.
C, find out some of the reverse line, re-connected.
(D), the phenomenon: all the LED is not bright
Problem: a, switching power supply without voltage output.
B, switching power supply output wiring is correct.
C, LED lamp wiring voltage error.
Solution: a, try to access the switching power supply input.
B, power supply wiring is positive and negative is correct.
C, check the power input port data is normal.
D, the power output port output data is normal.
E, to ensure that the LED input interface voltage DC5V; greater than DC5V voltage will burn the lamp
