5v 12mm led ws2811 pixel module 50 node/string digital rgb full color waterproof ip68 led lights for letters sign

Features:

RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a \'dot\' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can \'push\' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick. They\'re typically used to make outdoor signs

The pixels use 8mm diffused RGB LEDs, with a 120 degree beam width. The total max brightness of all LEDs is about 1600mcd but with the light more evenly distributed & mixed than a clear LED

12mm diameter (0.45") 75mm deep (1.5")

80--100mm

50 pieces per strand

These pixels use a WS2811 chip for full 24 bit color

5V power, 60mA maximum per pixel (LED on full white)

2-pin SPI-like protocol

UCS1903 ws2811 Datasheet for the chip inside each pixel

Brightness: Red = 3.3 Lumens/300 mcd, Green = 10 Lumens/1000 mcd, Blue = 2.7 Lumens/300 mcd (mcd calculation based on full 120 degree beam)