noted:

1: this pixel node works with parallel signal Transmission,each pixel is individually controlled, each node as one pixel with 3 RGB channels inside,256gray scale,any bad or not working node during the string would not affect the other nodes's working.

2: we use the WS2821A,parallel-single wire-three channels-256gray level-constant current led driver IC

3: the signal is still TTL input, so they can be stilll controlled by the T-1000S,t-1000B,T-1000A,T-4000,T-8000A,T-100K,T-200K.H805SBEtc,(please choose the dmx mode when you edit the programme with lededitor or led built software)

4: it can also work with DMX marster controller directly,you can connect the DAT wire to the DMX+ of the dmx controller,and leave the dmx- port alone

 

Specification:

Part No	RA-40mm-WS2821A
Color	full color RGB(WS2821A IC inside)each module as one pixel;takes 3dmx channels
LED Qty	6pcs high bright 5050 smd rgb led
Input Volt	DC24V
Max current	60MA
Max Power	1.44W
Driver method	Constant current circuit
Dimension	30mm diameter
Viewing angle	150-180degree
Protection Level	IP33 non-waterproof
Certification	CE and RoHS
Standard connection	20pcs module per string
Standard wire length	100MM(from side to side)
Housing	transparent cover
Fixed way	screw
Lifespan	35000 hours
Warranty	2years
Operation temperature	-40-50
Store temperature	-50-60