The runtime of the light is dependent on the amount of charging time that the solar panel is exposed to.A longer exposure to sunlight will increase the performance of the solar light. Try to place the light in a place where there is good sunlight exposure to charge your light properly

1.Installation instruction

(1)Remove carefully all the parts from the box 

(2)Find out the switch place then turn on the light per use the ON/OFF switch (here two places : one is inside the main body.one is in product outside bottom or top)

(3)Connect the parts and find one good place for lighting Please remove the transparent film which onto the panel

2 .Precautions

(1) Donot touch the surface of solar panel with any hard material

(2) You can check the operation of the light by simply covering the upper surface of the solar panel.The light will activate automatically once turn on

(3) Remember that the light is designed to work when it is dark.IF there is high ambient lighting nearby.then the LED light may be very dim or might not turn on at all. This does not mean that the light does not work;it could be that the surrouding is already very bright

(4) Althongh the battery has been charged by the manufacturer,the electric capacity could have dropped when you received the light. Please charge the light for a full day before you use in order for the light to perform at its maximum ability

(5) When you charging the light ,muse make sure the switch in the  “ON” place

3.Replacing the battery

If the light stops working after being used for a long time ,maybe the battery is beyond is beyond its lifespan.You can replace the old battery with a new rechargeable battery

4.Specification: