| Power Source: | Solar |
|---|---|
| Style: | Modern |
| Certification: | CQC,FCC,RoHS,CCC |
| Solar Cell Type: | Ni-MH |
| Protection Level: | IP65 |
| Voltage: | 6V |
| Usage: | Holiday |
| Is Dimmable: | Yes |
| Body Material: | ABS |
| Light Source: | LED Bulbs |
| Base Type: | Wedge |
| Is Bulbs Included: | Yes |
| Features: | Waterproof , Solar Power |
| Warranty: | 1 |
| Model Number: | B01264B4F2 |
| Brand Name: | LEDERTEK |
| Keyword: | Led Solar Light Outdoor Motion Sensor |
| Product Dimensions: | 6.5 x 2.6 x 3.7 inches |
| Item Package Quantity: | 8 pcs |
| Type of Bulb: | LED |
| Special Features: | Waterproof, Adjustable |
| Quality: | Premium LederTEK Brand |
| Features : | Bright,Long life,safety,Energy Saving |
| Keyword 1: | outdoor lights solar |
| Unit Type: | lot (4 pieces/lot) |
| Package Size: | 20cm x 18cm x 5cm (7.87in x 7.09in x 1.97in) |
| Package Weight: | 0.8kg (1.76lb.) |
Quick Details
Specifications
New 4-Pack lederTEK 2nd Generation 16 LEDs Outdoor Wireless Solar Powered PIR Motion Sensor Light/ Wall lights/ Security lights
Brief introduce
1.This product is a sort of energy-saving solar product with portable installation.
2.It applied widely for illumination in courtyard, street, garden, plaza, etc.
3.Easy installation: fixed installation and separated installation. No need any line arrangement and other complicated install process.
4.Use solar-charging system, light controller and human induction control. So that it would turn off autormatically in daytime, turn on when people walking near by. No need any manual control for the button of light.
5.Adopt Ultra-thin design, and base on side lighting principle so that the light would be gentle and not dazzling.
Specification
1.Solar panel : 5.5V, 0.65W
2.Battery : 3.7V, 1000MAH
3.LED Qty : 16pcs SMD : 3528
4.Rated power : 1W
5.Product dimension : 145mm*95mm*65mm
6.Product weight : 190g
To use the supplied key pin to unlock
Then screw on the wall by supplied screws
Step1: charging under sun in daytime around 7h.
Step2: Dim light in dark/at night Auto night sensor.
Step3: Bright light at night when people come close auto bright.
Step4: People move away, turn to dim light again to save power.
Functions
1.After installed, insert the needle into the small hole marked ON/OFF, the light is on. When people coming near, the lamp will turn on full bright for 40 seconds, when people leave, the lamp will turn to dim mode.
2.When people coming near again, the lamp will turn to full bright, this process has been repeated.
3.Button again, the system is off.
Installation
Due to the solar energy product, we sincerely advice to pick up the place with better sunlight and should face to South.
For more time the system enjoin the sunlight, more energy would be kept and can light more time at night.
Installation height should be around 3 meters according to our advise.
1.This product is a sort of energy-saving solar product with portable installation.
2.It applied widely for illumination in courtyard, street, garden, plaza, etc.
3.Easy installation: fixed installation and separated installation. No need any line arrangement and other complicated install process.
4.Use solar-charging system, light controller and human induction control. So that it would turn off autormatically in daytime, turn on when people walking near by. No need any manual control for the button of light.
5.Adopt Ultra-thin design, and base on side lighting principle so that the light would be gentle and not dazzling.
Specification
1.Solar panel : 5.5V, 0.65W
2.Battery : 3.7V, 1000MAH
3.LED Qty : 16pcs SMD : 3528
4.Rated power : 1W
5.Product dimension : 145mm*95mm*65mm
6.Product weight : 190g
To use the supplied key pin to unlock
Then screw on the wall by supplied screws
Step1: charging under sun in daytime around 7h.
Step2: Dim light in dark/at night Auto night sensor.
Step3: Bright light at night when people come close auto bright.
Step4: People move away, turn to dim light again to save power.
Functions
1.After installed, insert the needle into the small hole marked ON/OFF, the light is on. When people coming near, the lamp will turn on full bright for 40 seconds, when people leave, the lamp will turn to dim mode.
2.When people coming near again, the lamp will turn to full bright, this process has been repeated.
3.Button again, the system is off.
Installation
Due to the solar energy product, we sincerely advice to pick up the place with better sunlight and should face to South.
For more time the system enjoin the sunlight, more energy would be kept and can light more time at night.
Installation height should be around 3 meters according to our advise.
Package Includes:
4 x lederTEK 16 LEDs Motion Sensor Solar Light
1x Mounting Kits (Includes: 2 Screw, 2 Sleeve & 1 Activation Pin Key)
1 x User manual
Product Photo:
