| Brand Name: | Jiawen |
|---|---|
| Is Bulbs Included: | Yes |
| Solar Cell Type: | Ni-MH |
| Voltage: | 6V |
| Certification: | CCC,CE,RoHS |
| Body Material: | ABS |
| Light Source: | LED Bulbs |
| Style: | Art Deco |
| Protection Level: | IP65 |
| Warranty: | 2 |
| Is Dimmable: | No |
| Power Source: | Solar |
| Unit Type: | lot (2 pieces/lot) |
| Package Size: | 12cm x 12cm x 18cm (4.72in x 4.72in x 7.09in) |
| Package Weight: | 0.3kg (0.66lb.) |
Quick Details
Specifications
Dear customer,The light color of front LED is both white(6000k), the light color of back LED has blue red green and warm white , when you place order, you can see the small picture to choose the right choice you want.
Product Features
-- Materal: Material using ABS plastic ,which can be applied to the outside because of its excellent chemical properties.
-- Light source: the new general technology for COB, high luminous efficacy (120lm/W), low lumens depreciation.(works 50000H the luminous keep 70% above of begining)
-- Using polycrystaline scilicon solar cells, high electrical efficacy(17.4%),18650 lithium battery inside, the volume is 1200mAh,non-memory effect, it can be charged 800 times above, long discharge time.
-- adanced control-systom be used on the lamp,it can realize three types with the infrared sensing. PIR: PIR detector is applied to the lamp, sensing distance from 0 to 5 meters.
-- Atmosphere lamp: the atmosphere lamp backside is designed to decorate the walls at night.
Basic Information
1.Led Type: COB
2.Beam angle:120°, IP Degree:IP65
3.Frequency (Hz) :47 to 63Hz
4.Detectable distance:0-5M
5.led light color: front led is both white light, the back Led has blue and warm white light two kinds
6.Recharge time:6hrs, can work continuously for 3-6 nights.
7.Housing Color:White and black
8.Solar panel: 0.8W Mono-crystalline Silicon
LED Solar Wall Light Mode Instructions:
LED Solar Wall Light Mode Instructions:
We provide three modes for the lamp:
Insert and click with iron pin into the unlock hole when you install it.
1. One-time click the switch button, 100% brightness when people passes by, 25s will be off automatically after leaving;(atmosphere light on back will not off)
2. Double click, 100% full light lasting 25s if movement has been detected,30% luminance remains after people left;(atmosphere light on back will not off)
3. Clicked by three times, the lamp will keep on lighting all the time with 80% brightness at night, and off at daytime,the atmosphere on back will off at the same time at daytime.
4. And one more click, switch will be locked, lamp is turned off.
LED Solar Wall Light Installation:
1. Drill 2 holes of 6mm at the requested place.
2. Fix 2 expansion plugs into the holes.
3. Fix the screw M4x25mm to the lower expansion plug with a little spare space, insert the stripe groove into the screw groove and fixed.
4. Straighten the whole light and fasten the upper screw M3x25mm strictly.
5. Switch on the lamp by the provided unlock pin.
