Single LED 1.5W with 6 LED insides, total 9W super brightness.
Bronze housing materials, 100% anti-corrosion.
Standard 1/2" NPT thread type, connected with 2 meters cable.
Connected with waterproof connector in order to easy installation, no drilling hole are needed, just screw it into the holes on your boat.
Waterproof: IP68. Connect to 12-24V battery or power sources only. Current working: 750MA, Luminous Flux 650 Lm.
Product Description
LED Color: Blue
Installation instruction:
1. Loosen the drain light.
2. Run the cable leads thru the garboard drain opening and screw the drain plug light assembly into the existing garboard fitting. The garboard fitting is 1/2 NPT.
3. Connecting the light wire to a 12-24V on/off switch. Plug in the waterproof connector.
4. Attach the red lead the positive(+) with the included in line 3 AMP assembly fuse and the black lead to the negative (-).
5. Switch on the light to check if it works well
connected with 2 meters cable.
Note:
1. Standard ½"NPT joint can be easily intalled by your hands
2. Please use the light under the water and the test output must be DC12-24V. If not, the light will shut off in a few minute as it is overheated design
3. Please don't use any tools (like pliers and knife) to install the light as it may destroy the protective layer
4. Please don't press the outgoing bulke or shake the wire hardly, or it will damage the driver
Packing include:
1* Drain Plug light
1* protective tube