Quick overview

TIPTOP Co2 jet DMX Adjustable remains industry standard when referring to mounted co2 jets. It's simple design and ease of use allows for both DMX and Standard power on/off capabilities. This is by far the most versatile and most sought after unit on the market. From clubs to concerts, private parties to festivals. The TIPTOP co2 jet DMX switchable will get the job done.

Details:

Keeping the same simple CO2 Jet design as TIPTOP DMX switchable unit and adding the ability to angle the entire unit as well as provide the option to remove the base plate (used for stage or ground positioning) for mounting on the truss. This DMX adjustable Co2 jet is another industry standard when coming when coming across co2 jets. The hose and co2 jet listed here have quick connect fittings already installed so you can easily disconnect the hose from the co2 jet when not in use. Electricity is required for this package. Simply connect the hose to the co2 jet and the other end of the hose to your co2 tank. Then connect your DMX cable to the co2 jet “in” jack and the other end to any DMX 512 controller. And you ready to go.

On this unit the DMX switch allows you to turn DMX on (to use with DMX 512 controllers) or off to use as standard co2 jet (controlled using a power switch where as the on/off ability comes power being applied to the unit). Assigned to DMX channel 1, the ideal DMX controller to use with this unit is one with a “flash” button (button that only send signal when held down), similar to ones used for strobe lights and fog machines. Depending on which DMX controllers/system you are using. This jet may only function on channel 1 as the design is implemented to accept DMX signal. Therefore unavailable on other channels. This co2 jet shoots a 25-35 foot high stream of co2 which is about 4-6 feet wide. There co2 jets are used in stage productions. Nightclub, bars, live performances, concerts, haunted houses, special events and much more, the co2 dissipates immediately after coming out of the jet so the cloud vanishes in seconds after the user stops activation.

Specification:

Net weight: 8.5kg

Gross weight: 10kg

Model: TP-T26

Height: 38cm

Length: 20cm

Width: 20cm

Output: high output

Operation mode: 2 modes, DMX and Power on/off

DMX channels: 2 channels (CH1-on/off, CH2-Length of ON)

Linkable: Yes, via DMX cables

Power: 200W

Voltage: AC90V / 240V. 50-60HZ

Co2 gas shot angle: adjustable 0-100 degree

Shot height: 7.6-10.6meter

Nozzle materials: ABS

Hose length: 6meter or custom length available

Product warranty time: 1 year

Packing size: 42cm*30cm*30cm

 

Packing list for each unit:

co2 jet machine

6m gas hose

2m dmx cable

power cable

manual book