| Item Type: | Night Lights |
|---|---|
| Power Source: | DC |
| Is Batteries Required: | No |
| Power Generation: | Motion |
| Certification: | CE,RoHS |
| Battery Type: | None |
| Usage: | Emergency |
| Model Number: | NL-PIR-S1V28-30D-Eu |
| Is Batteries Included: | No |
| Brand Name: | newstyle |
| Body Material: | ABS |
| Wattage: | 0-5W |
| Light Source: | LED Bulbs |
| Voltage: | 12V |
| Type: | Night Light |
| Is Bulbs Included: | No |
| Shape: | LED Strip |
| Waterproof Grade: | IP65 |
| Voltage Rated: | DC12V |
| Led strip size: | 47.23'' L *0.3''W*0.08''H |
| Unit Type: | piece |
| Package Size: | 12cm x 12cm x 7cm (4.72in x 4.72in x 2.76in) |
| Package Weight: | 0.25kg (0.55lb.) |
Quick Details
Specifications
Specification
Led Strip Size:47.23'' L *0.3''W*0.08''H
Voltage Rated:DC12V
Waterproof Grade:IP65
Color Temperature: Warm White 2500-2700K
Input: 85-265VAC 60Hz
Output: DC12V 1A/2A
Led Strip Output: 300 Lumen/600 Lumen
Turn-off Delay Time: 30s / 6min
Sensor Distance: 3-5M
Sensor Angle: ≤100°
Control: Ambient Light Automatic Monitoring and PIR Sensor Function at Dark Environment
Energy Consumption: 6W
About Length
1. LED light strip: 1.2m
2. DC cable on adapter: 1.45m
3. DC cable on strip light: 1m
4. Branch cable: 1.5m / 4.9ft (each branch)
Introduction
Human motion capture+intelligent light control system,The lamp does not light in daytime.get out of bed at night will automatically light.Go back to bed,light goes out.
Activated sensor smart solution
Built-in human body passive infrred(PIR) motion sensor light,automatic turn on and shut off by human indiction in the dark environment.
The sensor has auto shut off timer from 30seconds-6 minutes adjustment.you can see the preferenceas you need.
As the bed light is light sensation,so the light will light on in very dark environment and will not work when it can sense light.
Installation
1.timing adjustment:adjust the time from 30 seconds to 6minutes
2.Clean surface:place the light on a clean surface
3.Connect components:connect the sensor and adaptor
4.Choose installation position:position sensor where it will directly pick up body motion movement
5.Installation under the bed:Place the connected components under the bed
6.Installation suggestions
After finishing the installation ,use the right clips to fix the connection wires
7.Fixed strips :tighten the 2 edges of the strip with small stick on to hold it tight in place
8.Notes:Can be cut according to the length which you need
Package included
1*waterproof led strip(Length 1.2meter)
1*motion and light sensor
1*power adaptor
1*blister packin including User Manual
Parts(clips,screw,dhesive tape)
