Dual Sensor US/EU Kit

---with colorful retail package

4AA Battery Powered Single Sensor Kit

---with colorful retail package

• Timer Function from 15 - 150 seconds,Auto turn OFF after walking away
• Note: Just working at dark environmental,meanwhile movement
• 3M adhesive on the backside of the timer sensor switch
• The following is the wire holders with adhesive tape on the backside,it is good for solution to hold the wire,better than screws to fix it.

 

 

 

How to Connect ? --- For Dual Sensor EU/US Kit

 

How to Connect ? --- For 4AA Battery Powered Kit

 

Timer Sensor LED Strip Light 
With the timer motion sensor,detecting both light and movement,lighting up the dark environmental when you walk into induction area, Such as: get up to washroom,go up & down stairs,or come nearby at night. Lighting up your way and never disturbing others.

Specification: 
LED Flexible Strip Light 
LED Qty: 90 leds (1.5m / 5ft) 
LED Strip Light Lengh=1.5M, Width=8mm 
Color: Warm White 
Color Temperature: 2800-3200K 
Working Voltage:12V DC 
Waterproof Grade: IP65 
 

Note:
UL Listed Power Adapter: 12V 1A (UL Listed Power Adapter only for United States,Canada)

CE/RoHS EU Power Adapter: 12V 1A ( For other countries)

?NO Power Adapters for 4AA Battery Powered Single Sensor Kit,but a 4AA Battery Box ( 4AA battery is not included). you can buy battery in your local store,becaue the shipping is not allow to ship the battery. Hope you understand.

 

Motion Sensor: 
Working Voltage:12V 
15sec - 150 sec timer function (Auto turn on shut-off in the dark environment,light up when you need it,also energy saving) 
Detecting angle is 120°

Note:As the LED sensor strip lights is a light sensation,so the light will light on based on a dark environment, and will not work when it can sense light. 
 

Installation Reminding 
1.Please kindly clean the dust,ensure the paste place is enough clean before sticking, avoid easy falling off. 
2.Remove the adhesive tape film back of led strips,then install,there was 4pcs*wire holders in the package for fix the extension cable wire. By the way,you can cut the led strip lights on the marked place depends on your requested length. 
3. You must notice the direction of the (PIR) motion sensor,forward to the direction of walking,you can see the above photos,which tell you how to install. 
 

 

What You Get: 

--- For 4AA Single Sensor Kit

• 1 x 1.5m LED Sensor Bed Light Strip 
• 1 x Motion and Light Sensor 
• 1 x 4AA Battery Box (Battery is not included)
• 1 x 1.5m 1 Femal to 2 Male Extension Cable 
• 4 x Wire Holder

 

--- For Dual Sensor EU Kit

• 2 x 1.5m LED Sensor Bed Light Strip 
• 2 x Motion and Light Sensor 
• 1 x EU Plug Power Adapter 
• 1 x 1.5m 1 Femal to 2 Male Extension Cable 
• 4 x Wire Holders

--- For Dual Sensor US Kit

• 2 x 1.5m LED Sensor Bed Light Strip 
• 2 x Motion and Light Sensor 
• 1 x UL Listed Power Adapter 
• 1 x 1.5m 1 Femal to 2 Male Extension Cable 
• 4 x Wire Holders