| Item Type: | Night Lights |
|---|---|
| Power Source: | Rechargeable Battery |
| Power Generation: | Motion |
| Certification: | CE,RoHS,CCC |
| Is Batteries Required: | Yes |
| Shape: | Round |
| Usage: | Emergency |
| Model Number: | Sensor Lights |
| Brand Name: | Lmid |
| Is Batteries Included: | Yes |
| Body Material: | ABS |
| Wattage: | 0-5W |
| Light Source: | LED Bulbs |
| Is Bulbs Included: | Yes |
| Type: | Night Light |
| Battery Type: | Lithium Cell |
| Voltage: | 3.7V |
| Item Name: | Sensor Lights |
| Power: | 0.5W |
| LED Type: | SMD2835 |
| LED Qty: | 6pcs |
| Color Temperature: | 2700-6500K |
| Power Supply: | 3.7V 600 mAh Lithium Cell |
| Shell MaterialMilky Coating: | ABS and Plastic |
| Delay Time: | 30sec |
| Applications: | Wardrobe/Cabinet/Bedroom/Restroom/Corridor |
| Unit Type: | piece |
| Package Size: | 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) |
| Package Weight: | 0.19kg (0.42lb.) |
Quick Details
Specifications
Lmid USB Rechargeable PIR Motion Sensor Lights Wireless LED
Wall Lithium Cell Night Light Auto On Off For Hallway Bedroom Stair
Intelligent
Sensor Light will turn on automatically when it detects motion as far as 12 feet away with 100 degrees of vision and turns off automatically when no motion is detected for about 30 seconds.
Wireless
Sensor Light can be installed at anywhere, not limited by the wire access port, the only thing you have to do is change the batteries when them run up, for it have high quality and long life time.
USB Rechargeable
USB Rechargeable Motion Sensor LED Night Light has built-in USB rechargeable High-capacity lithium battery, to save extra expenses on replacing batteries.
Environmental friendly
Using effective LED chips, provide bright light but save power.
Item Name: Sensor Lights
Power: 0.5W
LED Type: SMD2835
LED Qty: 6pcs
Color Temperature: 2700-6500K
Power Supply: 3.7V 600mAh Lithium Cell
Surface Color: Milky Coating
Shell Material: ABS and Plastic
Induction Distance: 2-4.5M
Delay Time: 30sec
IP Rating: IP20
Product Size: 80*23mm
Applications: Wardrobe, Cabinet, Bedroom, Restroom, Corridor
1. The lamp is close when switch to OFF;The lamp keep normal light when switch to ON.
2. The lamp enter into automatic mode when switch to AUTO bottom.
3. After enter into the automatic mode, the light control switch under working condition, when the environment brightness is lower than 2-3LUX and people come into the induction area, lights open and keep 30 seconds. Again within 30 seconds to the human activities, will be new time 30 seconds. When the envoironment brightness is higher than 2-3LUX, even if people enter the sensor area, the light is not on.
4. he indicator is red when charging,the light is blue means full recharge.Please recharge when the light look dark.
1* Sensor Lights
1* Rear Cover
1* Hanging Sheet
1* Double-sided adhesive pad
1* Android USB Data Cable
Precautions:
1. In the brightness environment(day time), whether or not into the sensor area, will not light up.
2. In the absence of light environment, when the activities of the human body into the sensor area then light open immediately.
3. When the person left the sensor area, the light will automatically turn off after 30 seconds.
4. If people have been active in the sensor area, the lamp will light on.