Please tell us you need it 315MHZ or 433.92MHZ 

 

Here is only Receiver for  Professional,     

Receiver without the transmitter 

Here is only Receiver without the Transmitter

First of all, you must make sure your own transmitter frequency is 315MHZ or 433.92MHZ 

what is the IC Chip Number 

our receiver is learning code, it can learn most of Fixed Code and Learning Code Transmitter,

IC Chip like this (2262 2264 2260 2240 1527 etc)

it can not work with rolling code transmitter

 

Model Number : AK-220V-119

1.Working Voltage: AC220V +- 10%
2.Max Load:10A Relay, Resistive load≤8A, Inductive load≤3A
3.Channel: 1CH
4.Working Frequency : 315MHZ/433MZH Optional
Receiver sensitivity: : -105Db
Working temperature : -10'C - +60'C
Output way : Momentary. Toggle .Latched Adjusted by Jumper 
Code type: Learning code Add Controller by the Learning Button on the receiver

Output State:
It is adjusted by the Jumper on the Receiver Board,

(before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed)

 

A: Momentary-----------Put the Jumper on “M&G”.
B: Toggle------------put the Jumper on “T&G”
C: Latched------------- Take way the Jumper or put the Jumper on any 1 Pin.

 

Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,

Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF,

 

 

Latched------------Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF.

Learning Method:

Input AC220V for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, the Led indicator flash fast, it mean learning successfully.

Clearing Code

 
Keeping press the Learning Button on the receiver until the LED indicator OFF, it mean the code have been cleared successfully.

 

package included:
1*receiver (included cover)