Smart WiFi Switch  4CH 110V 220V 250V AC Control by Phone Itead interruptor 433mhz RF Remote Control On Off switches

 

 

 

 

Features

1 Support WIFI network. (Attention: The switch module must keep connect with wifi service.)

2 Support three working modes: self-lock, inter-lock and momentary control.

3 Support Max 8 timing tasks for each added device.

4 Support status tracking, home appliances status timely feedback to your App.

5 Support 433mhz RF remote transmitter control.(Can learn most 433.92mhz transmitter, like chip 2260,2262,2264,1527. Allow 16 different transmitters to control )

 

Product Specification:

1 Input voltage:  AC 85-250V

 

2 Maximum load: 10A

 

3 Working temperature: 0-60 centigrade

 

4 Control method: WIFI +RF Remote Control+ Manual Button Control

 

5 Channels: 4 Way

 

6 Switch size: 100*80*28mm

 

7 Passive output, commonly used as a mechanical switch.

 

8 Support system: Android/IOS

 

9 Remote control battery:A CR2025 Button battery(not include)

 

 

How to connect phone with switch?

1 Download and install the software of “eWeLink” from APP store or Google play store.

2 Follow “eWeLink” instructions to register an account on it.

3 Log in your account of “eWeLink”.

4 Press any manual control button (S1,S2,S3,S4) for 5 seconds until you see the LED D8 light flash quickly, then release it. Now add device on mobile phone by eWeLink APP according its introduction.

5 Now you can use your phone to control the switch under 2G/3G/4G signal.

6 You can name your own device and control it only by yourself.

7 You can also share your device with your family or friends.

 

How to learn 433mhz transmitter?

1 Press “learning button” until you see LED flash 1 time, release button, then CH1 learn.

2 Press “learning button” until you see LED flash 2 times, release button, then CH2 learn.

3 Press “learning button” until you see LED flash 3 times, release button, then CH3 learn.

4 Press “learning button” until you see LED flash 4 times, release button, then CH4 learn.

How to set working mode?

Supply AC 85-250V power to the relay.

1: Press mode button until you see D9 flash 3 times, release button, now it is self-lock.

2: Press mode button until you see D9 flash 2 times, release button, now it is inter-lock.

3: Press mode button until you see D9 flash 1 time, release button, now it is momentary.

 

What is the difference between working mode?

1 Self-lock: Press remote button A , receiver CH1 ON. press button A again, then receiver CH1 OFF

2 Inter-lock: Press remote button A , receiver CH1 ON, and receiver CH2,CH3,CH4 OFF.

3 Momentary:Press remote button A, receiver CH1 ON. After 1 seconds,  receiver CH1 OFF

 

 

FQA

1 Where can I use this switch?

First, you have a wireless router and WIFI service in your house;

Second, You install this switch in the range of wireless router WIFI signal.

Third, You connect your phone with the switch under wireless router WIFI service.

Then you can go anywhere to control it now.

 

2 Where can I download the APP?

APP store and Google Play store---- eWeLink

 

3 Can I install this switch in my car?

Yes, but you have to install a wireless router and have WIFI service in the car, then it is Ok.

 

4 How many people can control my WIFI switch?

You can share this switch to as many people as you can.

2. After parcel sent out, it will become uncontrollable. We will appreciate your patience during the delivery period. Estimate delivery time is 20~45 days for most of the countries (except for Brazil) 

Note 1: We are not responsible for any taxes or VAT on the customs of buyer's country.

Note 2: If in 50 days you don’t receive the parcel, please contact us. We will submit a search with the shipping agent.

If during 60 days (90 days for Brazil) you don’t receive the parcel, we will issue full refund to you.