XIND ELE IR Remote Control Switch Learning Module 5V DC 1 way Relay, 1-key Transmitter, Female plug connector wire, IR05-1LM+PM2

Packing List:

1 X 12V IR learning switch

1 X IR remote control (no battery)

1 X DC Female Plug wire

Product Introduction:

1 Working voltage: 11.5-12V
  Remote control power supply: A CR2025 button battery

2 VCC: power supply 12V+, GND: power supply 12V-

CK=normally open, COM=common, CB=normally close, all of these three ports connect with output.

3 Size: 50*35mm, with four fixed bolt holes

4 Module Type: IR learning module

5 Working Mode: Support Jog control, Self-lock control and interlock control as you like.

6 Working Indication:

LED D1 light (Power indicator light)

LED D2 light (Learning indicator light)

LED D3 light (Relay turn on/off indicator light)

 How to set working mode?

There are three buttons S1,S2 and S3 on the module. The output is low level.

1 Interlock: Press the "S1" then supply power to the module, until you see the indicator light flash 3 times. Now the working mode is interlock control. (Press the button on remote, then relevant Channel of the relay module will work. But the other channels will stop output.)

2 Self-lock: Press the "S2" then supply power to the module, until you see the indicator light flash 3 times. Now the working mode is self-lock control. (Press the button on remote, then relevant Channel of the relay module will work. press the button once again, then it will stop.)

3 Jog: Press the "S3" then supply power to the module, until you see the indicator light flash 3 times. Now the working mode is jog control. (Keep pressing the button on remote, then relevant Channel of the relay module will work. Release the button, then it will stop.)

How to learn?

Set learning way:

Step 1: Supply power to the module, press the S1 button once time, the indicator LED D2 light will flash one time.

Step 2: Press the IR remote control, until you see the indicator LED D2 light flash 3 times quickly.

 Tips:

1 If you failed to learn, you will see the LED D2 light flash 6 times. You can try to set again as above.

2 The receiver module only supports to learn N EC format

3 The instructions about the LED D2 light.  Press one button of the module will flash one time; succeed in learning will flash three times; failed in learning will flash six times. 

Payment

There are many payment methods available,Terms of payment allowed to be made by Escrow, Visa, MasterCard, Moneybookers, Western Union, Bank Transfer and so on.
You can choose a method which is the most convenient for you. To protect your interests, your payment will be temporarily held by Aliexpress, and will not be released to us until you receive your order and are satisfied with it.
if you do not know how to pay the money,
please see this link:http://help.aliexpress.com/payment_method.html

About delivery
1 Usually we will ship out the package within 1-3 working days.
2 Time in transit: Transit time varies with different shipping methods.

Warranty&Return Policy
1 All item Comes with Basic 3 Month Sellers Warranty,if item defective in 3 Month,We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
2 If item Defective after 3 Month,Buyers can still send it back,We will contact suppliers or manufacturer for Warranty.Buyers Might Need pay the Shipping fee For resend the replaced item.
3 If you want to exchange the items received, you must contact us within 3 days of the receipt of your order. And you should pay the additional shipping fees incurred and the items returned should be kept in their original status.

Feedback
Since your feedback is very important to our business`s development, we sincerely iinvite you to leave 5-star and positive feedback for us if you are satisfied with our product and service.