Features:

Perfect for remote control of droplight, crystal lamp, modern low pressure lamp, absorb light dome, day flower lamp, fluorescent lamp, energy saving lamps, fan, LED light etc.

Quick and easy installation, not obstructed by walls, capable of connecting loads. Remote control and switch at the same time are used for convenience and flexibility.

Each set of remote controlling switch has its special code. More sets can be in a room without interference

Specifications:

Remote control distance: about 8-15 meters indoors, about 20m outdoor

Input voltage: 200-265 V

Each port load: fluorescent lamp: 800W; Energy saving lamp: 150W; LED 65 W

Operating temperature: -20 to + 60 celsius

Material: ABS

Size: If the picture shows

Power: 12V 23A battery (not included)

Certification: CCC certification and ce certification

Two Way Remote Control Switch:

function:

1. A / 1 will light up after power.

2. A / 1 used to off / off the blue group, B / 2 used to off / off the green group, \'\' ON \'/\' OFF \'means on / off the whole item.

3. Manual lighting sequence (wall switch control): One / 1, B / 2, the entire circuit is switched on.

Specifications:

1. Each group can bear the 1000W light bulb and 300W light bulb.

2. Working: AC200-245V 50Hz / 60Hz

3. Remote Control Battery: 12V 23A battery (battery not included)

4. Remote control distance: about 8-15 meters indoors, about 20m outdoor

5. Load Power: Each port load: fluorescent lamp: 600W; Energy saving lamp: 150W; LED 50 w

6. Resistive Load: The largest output power of some group within 3000 W. (such as incandescent or incandescent bulb, etc.)

Certification: CCC certification and ce certification

Three Way Remote Control Switch:

function:

1. A / 1 will light up after power.

2. A / 1 used to off / off the blue group, B / 2 used to off / off the white group, C / 2 used to turn off / off the yellow group, "OP" / "OFF" means turn on / off the whole item .

3. Manual lighting sequence (wall switch control): One / 1, B / 2, C / 3, the entire circuit is switched on.

Specifications:

1. Working: AC180V-240V 50Hz / 60Hz

2. Remote Control Battery: 12V 23A battery (battery not included)

3. Remote control distance: about 8-15 meters indoors, about 20 m outdoor

4. Load Power: Each port load: fluorescent lamp: 600W; Energy saving lamp: 150W; LED 50 w

5. Resistive Load: The largest output power of single group within 1000 W. (such as incandescent or incandescent lamp, etc.)

Certification: CCC certification and ce certification

Quantity: 1 ST

Remark:

1. Due to the different monitor and light effect, the actual color of the item differs slightly from colors in the picture. thank you!

2. Please 1-5mm measure deviation by manual measurement.

Packaging:

1 x Remote Controller (battery not included)

1 x Remote Control Emitter

A mode remote control switch