Note: The color of the item may vary slightly due to photography and your own computer

Features:
1. This switch is an isolated touch sensor switch, applicable to all types of lamps on the medium(such

as glass, acrylic, plastic , ceramic, etc.)
2. High safety performance, long lifespan, beautiful and generous, is the first choice of making top

grade products
3. Can ensure customers safe, effectively prevent the interference of the outside world and the

outside world.
Specifications:
Working voltage: 6-12V DC
Load power:≤36W
Size: 4.7 x 3.2 x 1.5cm/1.85 x 1.26 x 0.59"(L X W X H)
Wires Connection:
Red and black wire connects +/- of 6-12VDC;
Red and yellow wire connects the lamp;
Black touch contact will install back of the mirror.
Installation Procedure:
Note: before installation,please cut off the main power.
1, to set a touch point on the mirror,the diameter of the touch point should be 9-10mm,first of all,

should remove the quicksilver of mirror around the touch point,the size for the removable quicksilver

should be 1.5-2mm;
2, to make a reticle in the middle of the touch point,there are three arrow lines on cover of the switch,

when install,the three arrow lines should aline any three lines of the reticle,it can touch to control if

after aline the direction,right now remove the paster of the touch board,and then can install the touch

switch on the mirror,after that you can fix it using other stuff in order to avoid from dropping.

Package included:
1 x touch switch