INPUT 110V 220V 4CH Channel WIFI Switch OUTPUT 220V 433mhz RF Wireless Remote Switches Relay Control by Phone APP

 

1 X 4 Way AC 60-270V WIFI Switch

 

1 X RF 433mhz Remote Transmitter (build-in a 27A/12V battery)

 

Features

1 Support WIFI network. (Attention: The switch module must keep connect with wifi service.)

2 Support three working modes: self-lock, inter-lock and momentary control.

3 Support Max 8 timing tasks for each added device.

4 Support status tracking, home appliances status timely feedback to your App.

5 Support 433mhz RF remote transmitter control.(Can learn most 433.92mhz transmitter, like chip 2260,2262,2264,1527. Allow 16 different transmitters to control )

 

Product Specification:

1 Input voltage:  AC 60-270V

2 Output voltage: AC 60-270V

3 Maximum load: 10A

4 Working temperature: 0-60 centigrade

5 IN+ connect with Live wire; IN- connect with Null wire;

6 Control method: WIFI +RF + Manual Button Control

7 Channels: 4 Way

8 Switch size: 100*80*28mm

9 Active output, when you supply 220V power, the output will be 220V also.

10 Support system: Android/IOS

 

 

How to connect phone with switch?

1 Download and install the software of “eWeLink” from APP store or Google play store.

2 Follow “eWeLink” instructions to register an account on it.

3 Log in your account of “eWeLink”.

4 Press any manual control button (S1,S2,S3,S4) for 5 seconds until you see the LED light flash quickly, then release it. Now add device on mobile phone by eWeLink APP according its introduction.

5 Now you can use your phone to control the switch under 2G/3G/4G signal.

6 You can name your own device and control it only by yourself.

7 You can also share your device with your family or friends.

 

How to learn 433mhz transmitter?

1 Press “learning button” until you see LED flash 1 time, release button, then CH1 learn.

2 Press “learning button” until you see LED flash 2 times, release button, then CH2 learn.

3 Press “learning button” until you see LED flash 3 times, release button, then CH3 learn.

4 Press “learning button” until you see LED flash 4 times, release button, then CH4 learn.

 

After learn 433mhz signal, you still can't use your remote to control it. Follow below steps.

Step 1: Cut off power supply;

Step 2: Keep pressing "learning button";

Step 3: Supply power;

Step 4: The LED flash 3 times then release button.   OK!

 

 

How to clear 433mhz signal? 

Step 1: Keep pressing the "learning button" ;
Step 2: Supply power to switch;
Step 3: The LED light will flash 4 times slowly.
Step 4: Release the "learning button". OK. 

 

 

How to set working mode?

Supply AC 60-270V power to the relay.

1: Press mode button until you see LED flash 3 times, release button, now it is self-lock.

2: Press mode button until you see LED flash 2 times, release button, now it is inter-lock.

3: Press mode button until you see LED flash 1 time, release button, now it is momentary.

 

What is the difference between working mode?

1 Self-lock: Press remote button A , receiver CH1 ON. press button A again, then receiver CH1 OFF

2 Inter-lock: Press remote button A , receiver CH1 ON, and receiver CH2,CH3,CH4 OFF.

3 Momentary: Press remote button A, receiver CH1 ON. After 1 seconds,  receiver CH1 OFF

 

 

FQA

1 Where can I use this switch?

First, you have a wireless router and WIFI service in your house;

Second, You install this switch in the range of wireless router WIFI signal.

Third, You connect your phone with the switch under wireless router WIFI service.

Then you can go anywhere to control it now.

 

2 Where can I download the APP?

APP store and Google Play store---- eWeLink

 

3 Can I install this switch in my car?

Yes, but you have to install a wireless router and have WIFI service in the car, then it is Ok.

 

4 How many people can control my WIFI switch?

You can share this switch to as many people as you can.

2. After parcel sent out, it will become uncontrollable. We will appreciate your patience during the delivery period. Estimate delivery time is 20~45 days for most of the countries (except for Brazil) 

Note 1: We are not responsible for any taxes or VAT on the customs of buyer's country.

Note 2: If in 50 days you don’t receive the parcel, please contact us. We will submit a search with the shipping agent.

If during 60 days (90 days for Brazil) you don’t receive the parcel, we will issue full refund to you.