Product Main

Quick Details

Certification: CCC
Features: 10A
Switch Type: Remote Control
Warranty: China
Model Number: 12v-1
Item Type: Switches
Unit Type: piece
Package Size: 5cm x 5cm x 5cm (1.97in x 1.97in x 1.97in)
Package Weight: 0.09kg (0.20lb.)

Specifications

Please tell us you need it 315MHZ or 433.92MHZ 

 

Here is only Receiver for  Professional,     

Receiver without the transmitter 

Here is only Receiver without the Transmitter

First of all, you must make sure your own transmitter frequency is 315MHZ or 433.92MHZ 

what is the IC Chip Number 

our receiver is learning code, it can learn most of Fixed Code and Learning Code Transmitter,

IC Chip like this (2262 2264 2260 2240 1527 etc)

it can not work with rolling code transmitter

 

AK-RK01S-12

 

1.Working Voltage: DC12V
2.Current:Standby≤10mA,Working ≤128mA
3.Working Temperature: -20'C—+60'C
4.Receiver Frequency: 315MHz/433.92MHZ
5.Receiving Sensitivity: -105dB
6.Output State: Switching Value
7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A
8. Receiver Board Size:50*34*16mm      Case Size:63*38*22mm
9.Power LED    Relay LED     Learning LED
Learning Code: Add transmitter by the Learning Button on the receiver
Output State:     It is adjusted by the Jumper on the Receiver Board,
(before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the State will not be changed)
Momentary----------Take away the Jumper or put the Jumper on 1 Pin
 
Toggle----------------Jumper "2& 3 Pin"
Latched--------------Jumper "1&2"Pin
Momentary ------------Press the Transmitter button and keep, the receiver relay is ON, release button, the receiver relay is OFF,
Toggle ---------------Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF,
Latched ------------------Press transmitter button A, the receiver relay A is ON, Press Button B, the Receiver is OFF
Learning Method
Input power for the Receiver .Press the Learning Button until the Led indicator ON. Then press transmitter, as your hear the Relay act, it mean learning successfully.
Clearing Code
Keeping press the Learning Button on the receiver until the LED indicator ON to Off, it mean the code have been cleared successfully.
Package included:    
     
 1*receiver (with cover)   
aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()